Splashbacks and tiling in Wigston

What prompts splashbacks and tiling in Wigston?

If the units in your Wigston kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

Some households in Leicestershire want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down. Wigston sits about 4 miles south-east of Leicester, and our Leicestershire coverage takes in everything in between.

What do splashbacks and tiling in Wigston include?

Your written quote lists everything included. For splashbacks and tiling, that normally means:

Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Tiled splashbacks between the worktop and wall units, set out from a centre line
Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote
Full-height or feature tiling behind the hob, sink or open shelving

Guide prices for splashbacks and tiling in Wigston

As a starting point for Wigston, these ranges include VAT at 20% and allow for typical labour costs in the East Midlands. Prices across the East Midlands are broadly in line with UK averages.

Guide prices for splashbacks and tiling in Wigston
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£390
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£290–£780
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£580
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Wigston?

Across Leicestershire you will often find Victorian terraces, 1930s semis, post-war estate houses and new-build estates, and each shapes the kitchen differently. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early. Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help.

Regulations for kitchen work in Wigston

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Getting the most from your splashbacks and tiling

Hold a few of your chosen tiles against the wall in your Wigston kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Ask to see where the tiling will start before the first row goes on in your Wigston kitchen, so narrow cut tiles end up in corners rather than on show.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Wigston

How much do splashbacks and tiling cost in Wigston?

Splashbacks and tiling in Wigston typically cost £150 to £390 including VAT for a tiled splashback, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Wigston before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Wigston. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Also covering nearby towns

The same service is available a short drive from Wigston, including: