Splashbacks and tiling in Market Harborough

Who usually needs splashbacks and tiling in Market Harborough?

If your Market Harborough home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

Homeowners in Market Harborough often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. Our Leicestershire coverage reaches every part of Market Harborough (LE16) and out towards Corby.

What does the job involve?

After the survey visit we write the scope down. For splashbacks and tiling in Market Harborough it usually covers:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Full-height or feature tiling behind the hob, sink or open shelving
Socket and switch plates refitted by an electrician once the tiling is finished
Tiled splashbacks between the worktop and wall units, set out from a centre line

What should you budget for splashbacks and tiling in Market Harborough?

The figures below are guide prices for Market Harborough, including VAT and adjusted for typical costs across the East Midlands. The fixed price comes after we have measured up. For the East Midlands, these ranges are close to the national figures.

What should you budget for splashbacks and tiling in Market Harborough?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£390
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£290–£780
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£580
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Market Harborough homes

The housing mix across Leicestershire includes Victorian terraces, 1930s semis, post-war estate houses and new-build estates, so no two kitchen fits are quite alike. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early. Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help.

Regulations for kitchen work in Market Harborough

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Getting the most from your splashbacks and tiling

Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Market Harborough home, as cutting dust and adhesive travel further than you expect.
If your Leicestershire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Market Harborough

How much do splashbacks and tiling cost in Market Harborough?

Guide prices in Market Harborough are about £150 to £390 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Market Harborough?

Yes. We work across Market Harborough, including the LE16 postcode district, and nearby towns such as Corby and Kettering. Book a free survey visit and we will arrange a time that suits you.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Splashbacks and tiling in neighbouring towns

Neighbouring towns where we offer splashbacks and tiling: