Flat-pack kitchen fitting in Wigston

Why do people in Wigston choose flat-pack kitchen fitting?

First-time buyers in Wigston often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating.

Some people in Leicestershire start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part. We work throughout Wigston (LE18) and across the wider Leicestershire area.

What we cover for flat-pack kitchen fitting in Wigston

The exact scope is agreed after the survey, but a typical job in Wigston covers:

Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Laminate worktops cut and jointed, with cut edges sealed around the sink
Panels, plinths, sink, tap and appliance connections to existing points
Back panels fitted fully into their grooves or fixed as the instructions require
Wall units hung on hanging rails or brackets fixed securely into the wall
Free survey visit to check the plan, the boxes and the room

Flat-pack kitchen fitting prices in Wigston

Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Wigston kitchen. For the East Midlands, these ranges are close to the national figures.

Flat-pack kitchen fitting prices in Wigston
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,700–£2,900
Medium flat-pack kitchen, built and fittedAs above	£2,700–£4,100
Large flat-pack kitchen with tall units, built and fittedAs above	£3,900–£5,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes around Wigston

Typical homes in this part of Leicestershire include Victorian terraces, 1930s semis, post-war estate houses and new-build estates. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early. Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help.

Do you need approval for flat-pack kitchen fitting in Wigston?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Worth knowing before the fit

If the flat-pack sink base in your Wigston kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Set aside a room next to the kitchen in your Wigston home for assembly, with enough floor space to lay a tall larder carcass down flat.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Wigston

How much does flat-pack kitchen fitting cost in Wigston?

Flat-pack kitchen fitting in Wigston typically costs £1,700 to £2,900 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Wigston do you work in?

All of them. Our Leicestershire coverage takes in the whole of Wigston, including the LE18 postcode district, as well as surrounding towns such as Oadby. If you are unsure, send us your postcode.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Also covering nearby towns

The same service is available a short drive from Wigston, including: