Splashbacks and tiling in Stafford

Thinking about splashbacks and tiling in Stafford?

Landlords around Staffordshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.

Homeowners in Stafford often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. Kitchens in every part of Stafford are covered, and the survey visit is free wherever you are in Staffordshire.

What we cover for splashbacks and tiling in Stafford

After the survey visit we write the scope down. For splashbacks and tiling in Stafford it usually covers:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Free survey visit to check the walls, agree the layout and give an itemised quote
Old tiles removed and walls prepared, patched or boarded where needed
Socket and switch plates refitted by an electrician once the tiling is finished
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Tiled splashbacks between the worktop and wall units, set out from a centre line

What should you budget for splashbacks and tiling in Stafford?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.

What should you budget for splashbacks and tiling in Stafford?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Staffordshire includes Victorian terraces, 1930s semis, post-war estate houses and moorland stone cottages, so no two kitchen fits are quite alike. Terraces in Stoke-on-Trent often have a small kitchen in the rear offshoot, while 1930s semis and estate houses tend to have a compact kitchen beside the dining room.

Terraced streets with limited parking and narrow moorland lanes in the north of the county can complicate deliveries, so vehicle size and timing are planned ahead. Water across much of Staffordshire is moderately hard to hard, so limescale on taps and boiling water taps is worth planning for.

What rules apply to splashbacks and tiling in Stafford?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes within the Staffordshire part of the Peak District National Park, listed buildings and conservation areas may need consent for new vents or alterations to historic features.

Planning ahead

Ask to see where the tiling will start before the first row goes on in your Stafford kitchen, so narrow cut tiles end up in corners rather than on show.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
If your Staffordshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Stafford

How much do splashbacks and tiling cost in Stafford?

For a tiled splashback, budget around £150 to £400 including VAT in Stafford. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Which parts of Stafford do you work in?

All of them. Our Staffordshire coverage takes in the whole of Stafford, including the ST16 postcode district, as well as surrounding towns such as Rugeley. If you are unsure, send us your postcode.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Splashbacks and tiling near Stafford

The same service is available a short drive from Stafford, including: