Splashbacks and tiling in Cannock

Thinking about splashbacks and tiling in Cannock?

If the units in your Cannock kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

Many people in Staffordshire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease. Homes right across Cannock are covered, as are nearby places such as Great Wyrley, Burntwood and the villages in between.

What is included in the work?

After the survey visit we write the scope down. For splashbacks and tiling in Cannock it usually covers:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Old tiles removed and walls prepared, patched or boarded where needed
Tiled splashbacks between the worktop and wall units, set out from a centre line
Socket and switch plates refitted by an electrician once the tiling is finished
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

What do splashbacks and tiling cost in Cannock?

Use these ranges to plan your budget. They include VAT, reflect costs in the West Midlands, and are firmed up once we have seen your Cannock kitchen. Prices across the West Midlands are broadly in line with UK averages.

What do splashbacks and tiling cost in Cannock?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Cannock and what they mean for a kitchen

You will find Victorian terraces, 1930s semis, post-war estate houses and moorland stone cottages throughout Staffordshire. Terraces in Stoke-on-Trent often have a small kitchen in the rear offshoot, while 1930s semis and estate houses tend to have a compact kitchen beside the dining room.

Terraced streets with limited parking and narrow moorland lanes in the north of the county can complicate deliveries, so vehicle size and timing are planned ahead. Water across much of Staffordshire is moderately hard to hard, so limescale on taps and boiling water taps is worth planning for.

What rules apply to splashbacks and tiling in Cannock?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes within the Staffordshire part of the Peak District National Park, listed buildings and conservation areas may need consent for new vents or alterations to historic features.

Worth knowing before the fit

Choosing stone worktops for a Cannock kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
If you are renting out a flat in Cannock, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Cannock

How much do splashbacks and tiling cost in Cannock?

Splashbacks and tiling in Cannock typically cost £150 to £400 including VAT for a tiled splashback, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Cannock before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Cannock. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Splashbacks and tiling in neighbouring towns

Close to Cannock? We cover these nearby towns too: