Splashbacks and tiling · Scotland
Splashbacks and tiling in Renfrewshire and Inverclyde
If you need splashbacks and tiling anywhere in Renfrewshire and Inverclyde, we survey the kitchen, agree the scope with you and book every trade through to handover.
Who usually needs splashbacks and tiling in Renfrewshire and Inverclyde?
If the units in your Renfrewshire and Inverclyde kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.
Some households in Renfrewshire and Inverclyde want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down.
What do splashbacks and tiling in Renfrewshire and Inverclyde include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Renfrewshire and Inverclyde?
The figures below are guide prices for Renfrewshire and Inverclyde, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £140–£380 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £280–£750 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £240–£560 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Renfrewshire and Inverclyde
The housing mix across Renfrewshire and Inverclyde includes sandstone tenement flats, Victorian villas, four-in-a-block flats and new-build estates, so no two kitchen fits are quite alike. Paisley and Greenock tenement flats often have a kitchen off the hall, while villas and newer homes in Newton Mearns tend to have larger kitchens with island space.
Water in Renfrewshire and Inverclyde is soft, which is kind to taps and appliances and keeps limescale on boiling water taps to a minimum. Steep streets in Greenock, tenement common stairs and four-in-a-block flats with outside stairs can all affect deliveries and worktop handling.
If your home is a tenement flat, the kitchen is often small with a high ceiling, and tall units or a high-level shelf make good use of the height. Villas and newer family homes tend to suit a supply-and-fit kitchen with an island, integrated appliances and a separate utility space.
Rules for splashbacks and tiling in Renfrewshire and Inverclyde
In Scotland, tiling and splashbacks do not need a building warrant or planning permission. If sockets or switches are moved to suit the new wall finish, the electrical work must meet the building standards and BS 7671, and you should receive an Electrical Installation Certificate or a Minor Works Certificate. In a listed building, removing historic tiles or panelling may need listed building consent, so check with the local authority first.
Paisley and Greenock have conservation areas and listed buildings, so a new external vent may need consent, and tenement owners may need neighbours' agreement.
Before you start
- Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.
- Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.
- Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
- Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.
- Ask to see where the tiling will start before the first row goes on in your Renfrewshire and Inverclyde kitchen, so narrow cut tiles end up in corners rather than on show.
- If your Renfrewshire and Inverclyde kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Questions about splashbacks and tiling in Renfrewshire and Inverclyde
How much do splashbacks and tiling cost in Renfrewshire and Inverclyde?
Guide prices in Renfrewshire and Inverclyde are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Renfrewshire and Inverclyde?
Yes. We carry out splashbacks and tiling across Renfrewshire and Inverclyde, including Paisley, Greenock, Newton Mearns and Renfrew. Every job starts with a free survey visit and an itemised written quote.
Can heavy tiles or stone go on any kitchen wall?
Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.
When are splashbacks fitted during a kitchen installation?
Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
Splashbacks and tiling in towns across Renfrewshire and Inverclyde
Choose a town for local guide prices and postcode coverage:
- Splashbacks and tiling in Paisley
- Splashbacks and tiling in Greenock
- Splashbacks and tiling in Newton Mearns
- Splashbacks and tiling in Renfrew
- Splashbacks and tiling in Barrhead
- Splashbacks and tiling in Johnstone
- Splashbacks and tiling in Erskine