Splashbacks and tiling in Erskine

Thinking about splashbacks and tiling in Erskine?

Many people in Renfrewshire and Inverclyde choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

Landlords around Renfrewshire and Inverclyde often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. Our Renfrewshire and Inverclyde coverage reaches every part of Erskine (PA8) and out towards Clydebank.

What do splashbacks and tiling in Erskine include?

After the survey visit we write the scope down. For splashbacks and tiling in Erskine it usually covers:

Old tiles removed and walls prepared, patched or boarded where needed
Free survey visit to check the walls, agree the layout and give an itemised quote
Socket and switch plates refitted by an electrician once the tiling is finished
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Tiled splashbacks between the worktop and wall units, set out from a centre line
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs

What do splashbacks and tiling cost in Erskine?

These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.

What do splashbacks and tiling cost in Erskine?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£750
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£560
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Erskine

The housing mix across Renfrewshire and Inverclyde includes sandstone tenement flats, Victorian villas, four-in-a-block flats and new-build estates, so no two kitchen fits are quite alike. Paisley and Greenock tenement flats often have a kitchen off the hall, while villas and newer homes in Newton Mearns tend to have larger kitchens with island space.

Steep streets in Greenock, tenement common stairs and four-in-a-block flats with outside stairs can all affect deliveries and worktop handling. Water in Renfrewshire and Inverclyde is soft, which is kind to taps and appliances and keeps limescale on boiling water taps to a minimum.

What rules apply to splashbacks and tiling in Erskine?

In Scotland, tiling and splashbacks do not need a building warrant or planning permission. If sockets or switches are moved to suit the new wall finish, the electrical work must meet the building standards and BS 7671, and you should receive an Electrical Installation Certificate or a Minor Works Certificate. In a listed building, removing historic tiles or panelling may need listed building consent, so check with the local authority first.

Paisley and Greenock have conservation areas and listed buildings, so a new external vent may need consent, and tenement owners may need neighbours' agreement.

Tips before you start

Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
If you are renting out a flat in Erskine, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
If your Renfrewshire and Inverclyde kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.

Questions about splashbacks and tiling in Erskine

How much do splashbacks and tiling cost in Erskine?

Guide prices in Erskine are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Erskine do you work in?

All of them. Our Renfrewshire and Inverclyde coverage takes in the whole of Erskine, including the PA8 postcode district, as well as surrounding towns such as Clydebank. If you are unsure, send us your postcode.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Splashbacks and tiling near Erskine

The same service is available a short drive from Erskine, including: