Splashbacks and tiling · Scotland
Splashbacks and tiling in Dunbartonshire
Our splashbacks and tiling work covers the whole of Dunbartonshire, including Bearsden, Clydebank and Vale of Leven.
When do splashbacks and tiling make sense in Dunbartonshire?
If your Dunbartonshire home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.
Many people in Dunbartonshire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.
What do splashbacks and tiling in Dunbartonshire include?
Here is what usually goes into splashbacks and tiling, adjusted to your Dunbartonshire kitchen after we have measured it:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Dunbartonshire?
Use these ranges to plan your budget. They include VAT, reflect costs in Scotland, and are firmed up once we have seen your Dunbartonshire kitchen. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £140–£380 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £280–£750 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £240–£560 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Dunbartonshire
You will find sandstone tenement flats, Victorian villas, interwar bungalows and four-in-a-block flats throughout Dunbartonshire. Villas and bungalows in Bearsden and Bishopbriggs often have separate kitchens with room to open up, while tenements and four-in-a-block flats in Clydebank tend to have small galleys.
Dunbartonshire's water is soft, so limescale is rarely a problem and taps and boiling water taps tend to stay clean. Tenement closes and common stairs mean carrying units by hand, while villa driveways usually make deliveries simpler.
Opening an interwar bungalow kitchen into the dining room is a common way to make a family space, subject to a building warrant if the wall is load-bearing. Tenement flats often have compact kitchens where careful storage planning and slimline appliances help.
Rules for splashbacks and tiling in Dunbartonshire
In Scotland, tiling and splashbacks do not need a building warrant or planning permission. If sockets or switches are moved to suit the new wall finish, the electrical work must meet the building standards and BS 7671, and you should receive an Electrical Installation Certificate or a Minor Works Certificate. In a listed building, removing historic tiles or panelling may need listed building consent, so check with the local authority first.
The northern edge of the area borders Loch Lomond and The Trossachs National Park, and listed buildings or conservation areas may need consent before a new extractor vent is added.
Before you start
- Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.
- Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
- Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
- Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
- Ask to see where the tiling will start before the first row goes on in your Dunbartonshire kitchen, so narrow cut tiles end up in corners rather than on show.
- Hold a few of your chosen tiles against the wall in your Dunbartonshire kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Questions about splashbacks and tiling in Dunbartonshire
How much do splashbacks and tiling cost in Dunbartonshire?
Guide prices in Dunbartonshire are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Dunbartonshire?
Yes. We carry out splashbacks and tiling across Dunbartonshire, including Bearsden, Clydebank, Vale of Leven and Bishopbriggs. Every job starts with a free survey visit and an itemised written quote.
Which grout and sealant are easiest to keep clean?
A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.
Can you tile over existing kitchen tiles?
Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.
When are splashbacks fitted during a kitchen installation?
Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.
Splashbacks and tiling in towns across Dunbartonshire
Choose a town for local guide prices and postcode coverage:
- Splashbacks and tiling in Bearsden
- Splashbacks and tiling in Clydebank
- Splashbacks and tiling in Vale of Leven
- Splashbacks and tiling in Bishopbriggs
- Splashbacks and tiling in Dumbarton
- Splashbacks and tiling in Kirkintilloch