Splashbacks and tiling in Johnstone

Thinking about splashbacks and tiling in Johnstone?

When a Johnstone kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit.

Some households in Renfrewshire and Inverclyde want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down. Homes right across Johnstone are covered, as are nearby places such as Paisley, Barrhead and the villages in between.

What do splashbacks and tiling in Johnstone include?

Here is what usually goes into splashbacks and tiling, adjusted to your Johnstone kitchen after we have measured it:

Tiled splashbacks between the worktop and wall units, set out from a centre line
Free survey visit to check the walls, agree the layout and give an itemised quote
Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Socket and switch plates refitted by an electrician once the tiling is finished

Splashbacks and tiling prices in Johnstone

As a starting point for Johnstone, these ranges include VAT at 20% and allow for typical labour costs in Scotland. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

Splashbacks and tiling prices in Johnstone
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£750
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£560
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Johnstone homes

In and around Johnstone, homes range across sandstone tenement flats, Victorian villas, four-in-a-block flats and new-build estates. Paisley and Greenock tenement flats often have a kitchen off the hall, while villas and newer homes in Newton Mearns tend to have larger kitchens with island space.

Steep streets in Greenock, tenement common stairs and four-in-a-block flats with outside stairs can all affect deliveries and worktop handling. Water in Renfrewshire and Inverclyde is soft, which is kind to taps and appliances and keeps limescale on boiling water taps to a minimum.

Do you need approval for splashbacks and tiling in Johnstone?

In Scotland, tiling and splashbacks do not need a building warrant or planning permission. If sockets or switches are moved to suit the new wall finish, the electrical work must meet the building standards and BS 7671, and you should receive an Electrical Installation Certificate or a Minor Works Certificate. In a listed building, removing historic tiles or panelling may need listed building consent, so check with the local authority first.

Paisley and Greenock have conservation areas and listed buildings, so a new external vent may need consent, and tenement owners may need neighbours' agreement.

Tips before you start

Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
If your Renfrewshire and Inverclyde kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Johnstone home, as cutting dust and adhesive travel further than you expect.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Johnstone

How much do splashbacks and tiling cost in Johnstone?

For a tiled splashback, budget around £140 to £380 including VAT in Johnstone. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.

Can you measure up in Johnstone before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Johnstone. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Splashbacks and tiling in neighbouring towns

Neighbouring towns where we offer splashbacks and tiling: