Splashbacks and tiling in Oakham

Thinking about splashbacks and tiling in Oakham?

Many people in Rutland choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

If the units in your Oakham kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own. Our Rutland coverage reaches every part of Oakham (LE15) and out towards Melton Mowbray.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Oakham covers:

Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Full-height or feature tiling behind the hob, sink or open shelving
Free survey visit to check the walls, agree the layout and give an itemised quote
Tiled splashbacks between the worktop and wall units, set out from a centre line
Socket and switch plates refitted by an electrician once the tiling is finished

Guide prices for splashbacks and tiling in Oakham

Typical splashbacks and tiling prices for homes in Oakham, including VAT and adjusted for the East Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs in the East Midlands sit close to the national guide.

Guide prices for splashbacks and tiling in Oakham
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£390
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£290–£780
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£580
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Oakham homes

In and around Oakham, homes range across limestone cottages, stone farmhouses, post-war bungalows and new-build estates. Stone cottages often have a small kitchen with thick walls and deep window reveals, while bungalows and newer homes tend to have a squarer room that suits an L-shape.

Rutland's water is hard, so limescale on taps, sinks and boiling water taps is likely, and a scale-reducing filter can help. Village lanes and farm drives can be narrow for delivery lorries, so long worktops and tall units may need careful handling and a planned delivery time.

What rules apply to splashbacks and tiling in Oakham?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Many stone villages in Rutland have conservation areas and listed buildings, so a new external vent or changes to historic features may need consent first.

Tips before you start

If you are renting out a flat in Oakham, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Ask to see where the tiling will start before the first row goes on in your Oakham kitchen, so narrow cut tiles end up in corners rather than on show.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Oakham

How much do splashbacks and tiling cost in Oakham?

Splashbacks and tiling in Oakham typically cost £150 to £390 including VAT for a tiled splashback, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Oakham?

Yes. We work across Oakham, including the LE15 postcode district, and nearby towns such as Melton Mowbray and Stamford. Book a free survey visit and we will arrange a time that suits you.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Also covering nearby towns

The same service is available a short drive from Oakham, including: