Splashbacks and tiling · England
Splashbacks and tiling in Rutland
We carry out splashbacks and tiling across Rutland, from Oakham to the smaller towns, with a free survey visit and an itemised written quote as standard.
Why splashbacks and tiling for a Rutland home?
Some households in Rutland want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down.
Landlords around Rutland often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.
What do splashbacks and tiling in Rutland include?
Your written quote lists everything included. For splashbacks and tiling, that normally means:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Rutland?
The figures below are guide prices for Rutland, including VAT and adjusted for typical costs across the East Midlands. The fixed price comes after we have measured up. Costs in the East Midlands sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £150–£390 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £290–£780 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £240–£580 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Rutland
You will find limestone cottages, stone farmhouses, post-war bungalows and new-build estates throughout Rutland. Stone cottages often have a small kitchen with thick walls and deep window reveals, while bungalows and newer homes tend to have a squarer room that suits an L-shape.
Rutland's water is hard, so limescale on taps, sinks and boiling water taps is likely, and a scale-reducing filter can help. Village lanes and farm drives can be narrow for delivery lorries, so long worktops and tall units may need careful handling and a planned delivery time.
Units and worktops in a stone cottage usually need scribing to uneven walls, and lighting needs planning around small windows. Farmhouses and larger village homes often suit a supply-and-fit kitchen with a range cooker, an island or table and a separate utility.
Rules for splashbacks and tiling in Rutland
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Many stone villages in Rutland have conservation areas and listed buildings, so a new external vent or changes to historic features may need consent first.
Before you start
- Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
- Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.
- Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.
- Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
- If your Rutland kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
- Choosing stone worktops for a Rutland kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Questions about splashbacks and tiling in Rutland
How much do splashbacks and tiling cost in Rutland?
Guide prices in Rutland are about £150 to £390 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Rutland?
Yes. We carry out splashbacks and tiling across Rutland, including Oakham. Every job starts with a free survey visit and an itemised written quote.
Which grout and sealant are easiest to keep clean?
A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.
Can heavy tiles or stone go on any kitchen wall?
Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
Splashbacks and tiling in towns across Rutland
Choose a town for local guide prices and postcode coverage: