Splashbacks and tiling in Corby

What prompts splashbacks and tiling in Corby?

If the units in your Corby kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

If the kitchen in your Corby home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units. Homes right across Corby are covered, as are nearby places such as Kettering, Oundle and the villages in between.

What we cover for splashbacks and tiling in Corby

The exact scope is agreed after the survey, but a typical job in Corby covers:

Tiled splashbacks between the worktop and wall units, set out from a centre line
Old tiles removed and walls prepared, patched or boarded where needed
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Socket and switch plates refitted by an electrician once the tiling is finished
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Full-height or feature tiling behind the hob, sink or open shelving

What should you budget for splashbacks and tiling in Corby?

Typical splashbacks and tiling prices for homes in Corby, including VAT and adjusted for the East Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the East Midlands are broadly in line with UK averages.

What should you budget for splashbacks and tiling in Corby?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£390
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£290–£780
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£580
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Corby

You will find ironstone cottages, Victorian terraces, 1930s semis and post-war new town houses throughout Northamptonshire. Victorian terraces in Northampton and Kettering often have a long galley behind the back room, while post-war houses in Corby tend to have a compact rectangular kitchen.

Water across Northamptonshire is hard, so limescale on taps, sinks and boiling water taps is likely, and a scale-reducing filter is worth considering. Terraced streets with on-street parking can make unloading slow, and village houses on narrow lanes may need a smaller delivery vehicle for long worktops.

What rules apply to splashbacks and tiling in Corby?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed ironstone cottages and homes in village conservation areas may need listed building consent or planning permission for new vents or changes to historic fabric.

Getting the most from your splashbacks and tiling

If you are renting out a flat in Corby, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
If your Northamptonshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Choosing stone worktops for a Corby kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Corby

How much do splashbacks and tiling cost in Corby?

For a tiled splashback, budget around £150 to £390 including VAT in Corby. That reflects typical costs in the East Midlands; we confirm the actual figure in writing once we have measured up.

Do you work near Corby as well?

Yes. As well as Corby itself, we cover the rest of Northamptonshire and nearby towns such as Kettering and Oundle. The process is the same wherever the kitchen is.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Also covering nearby towns

Close to Corby? We cover these nearby towns too: