Kitchen Installers UK
0800 088 6341 Get a guide price

Sink and tap installation · England

Sink and tap installation in Surrey

Our sink and tap installation work covers the whole of Surrey, including Woking, Guildford and Esher.

Guide price£170 to £1,200
Towns covered25 towns, including Woking
TimescaleHalf a day to 1 day
Get a guide price Book a free survey visit
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

Is sink and tap installation right for your Surrey kitchen?

Homeowners across Surrey adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.

Landlords in Surrey often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.

What does sink and tap installation in Surrey include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • New sink fitted, sealed and connected to the existing supplies and waste
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • Sink moved to a new position with new supply and waste runs
  • Every joint leak tested, with water flow and drainage checked before handover

How much does sink and tap installation cost in Surrey?

As a starting point for Surrey, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

How much does sink and tap installation cost in Surrey?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£230–£460
Boiling water tap installedTank under the sink, filter and power supply£170–£400
Sink moved to a new positionNew supplies and waste run£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes across Surrey

The housing mix across Surrey includes 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, so no two kitchen fits are quite alike. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

Joining the kitchen and dining room in a 1930s semi, often with a peninsula and seating, is a common project. Larger detached houses tend to suit a supply-and-fit kitchen with an island, a boiling water tap, a separate utility and lighting planned in zones.

Rules for sink and tap installation in Surrey

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Before you start

  • Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.
  • If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.
  • Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
  • Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
  • Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
  • Ask whether a boiling water tap for your kitchen in Surrey needs a filter, how often it should be changed and where it will sit in the cupboard.

Questions about sink and tap installation in Surrey

How much does sink and tap installation cost in Surrey?

Sink and tap installation in Surrey typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover the whole of Surrey?

Yes. We carry out sink and tap installation across Surrey, including Woking, Guildford, Esher and Redhill. Every job starts with a free survey visit and an itemised written quote.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Sink and tap installation in towns across Surrey

Choose a town for local guide prices and postcode coverage:

Sink and tap installation in nearby areas

Free survey visit

Book a free survey visit in Surrey

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price