Kitchen Installers UK
0800 088 6341 Get a guide price

Sink and tap installation · England

Sink and tap installation in Hertfordshire

We carry out sink and tap installation across Hertfordshire, from Watford to the smaller towns, with a free survey visit and an itemised written quote as standard.

Guide price£160 to £1,100
Towns covered19 towns, including Watford
TimescaleHalf a day to 1 day
Get a guide price Book a free survey visit
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

What prompts sink and tap installation in Hertfordshire?

Plenty of people in Hertfordshire replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.

Homeowners across Hertfordshire adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.

What does sink and tap installation in Hertfordshire include?

Here is what usually goes into sink and tap installation, adjusted to your Hertfordshire kitchen after we have measured it:

  • New sink fitted, sealed and connected to the existing supplies and waste
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • Sink moved to a new position with new supply and waste runs
  • Every joint leak tested, with water flow and drainage checked before handover

How much does sink and tap installation cost in Hertfordshire?

As a starting point for Hertfordshire, these ranges include VAT at 20% and allow for typical labour costs in the East of England. Labour in the East of England generally costs more than the UK average, which lifts these ranges a little.

How much does sink and tap installation cost in Hertfordshire?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£220–£430
Boiling water tap installedTank under the sink, filter and power supply£160–£380
Sink moved to a new positionNew supplies and waste run£430–£1,100
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes across Hertfordshire

You will find 1930s semis, post-war new town houses, Victorian terraces and new-build estates throughout Hertfordshire. Stevenage and Hemel Hempstead new-town houses often have a small galley, while 1930s semis tend to have a narrow kitchen beside the dining room.

Hertfordshire's water is very hard, mostly drawn from chalk, so limescale on taps and boiling water taps is common and a softener or filter is worth considering. Commuter-town streets often have tight parking, and estate houses with shared parking courts can mean carrying units some distance to the front door.

Removing the wall between kitchen and dining room is a common job in a 1930s semi, often with a peninsula to separate cooking from seating. New-town houses often have small kitchens that benefit from a better layout, taller wall units and integrated appliances to save floor space.

Rules for sink and tap installation in Hertfordshire

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

A kitchen fit needs no planning permission, but listed buildings and conservation areas, including parts of St Albans and Welwyn Garden City, may need consent for external vents.

Before you start

  • Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
  • Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
  • Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
  • An undermount sink in a stone worktop is cut and polished by the fabricator, so choose the sink before the worktops are templated.
  • For a ceramic farmhouse-style sink in your Hertfordshire kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
  • Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.

Questions about sink and tap installation in Hertfordshire

How much does sink and tap installation cost in Hertfordshire?

Guide prices in Hertfordshire are about £220 to £430 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of Hertfordshire?

Yes. We carry out sink and tap installation across Hertfordshire, including Watford, Hemel Hempstead, Stevenage and St Albans. Every job starts with a free survey visit and an itemised written quote.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Sink and tap installation in towns across Hertfordshire

Choose a town for local guide prices and postcode coverage:

Sink and tap installation in nearby areas

Free survey visit

Book a free survey visit in Hertfordshire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price