Sink and tap installation in Aldershot

When does sink and tap installation make sense in Aldershot?

Some Aldershot households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size.

If you are fitting new stone worktops in your Aldershot kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator. Homes right across Aldershot are covered, as are nearby places such as Farnham, Farnborough and the villages in between.

What we cover for sink and tap installation in Aldershot

The exact scope is agreed after the survey, but a typical job in Aldershot covers:

New sink fitted, sealed and connected to the existing supplies and waste
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Sink moved to a new position with new supply and waste runs
Inset sink cut-outs made on site in laminate and wood worktops
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections

What should you budget for sink and tap installation in Aldershot?

The figures below are guide prices for Aldershot, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What should you budget for sink and tap installation in Aldershot?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Aldershot

The housing mix across Surrey includes 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, so no two kitchen fits are quite alike. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

What rules apply to sink and tap installation in Aldershot?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Tips before you start

Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Find the stopcock in your Aldershot home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
For a ceramic farmhouse-style sink in your Aldershot kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.

Questions about sink and tap installation in Aldershot

How much does sink and tap installation cost in Aldershot?

Guide prices in Aldershot are about £230 to £460 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Aldershot before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Aldershot. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Also covering nearby towns

The same service is available a short drive from Aldershot, including: