Sink and tap installation in Reigate

Why do people in Reigate choose sink and tap installation?

Plenty of people in Reigate replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.

Homeowners across Surrey adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in. Kitchens in every part of Reigate are covered, and the survey visit is free wherever you are in Surrey.

What does the job involve?

After the survey visit we write the scope down. For sink and tap installation in Reigate it usually covers:

Isolation valves on the hot and cold supplies, with flexible tap tails connected
New sink fitted, sealed and connected to the existing supplies and waste
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Sink moved to a new position with new supply and waste runs
Every joint leak tested, with water flow and drainage checked before handover

What should you budget for sink and tap installation in Reigate?

Typical sink and tap installation prices for homes in Reigate, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What should you budget for sink and tap installation in Reigate?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Reigate

The housing mix across Surrey includes 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, so no two kitchen fits are quite alike. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

Regulations for kitchen work in Reigate

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Getting the most from your sink and tap installation

Ask whether a boiling water tap for your kitchen in Surrey needs a filter, how often it should be changed and where it will sit in the cupboard.
For a ceramic farmhouse-style sink in your Reigate kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
An undermount sink in a stone worktop is cut and polished by the fabricator, so choose the sink before the worktops are templated.

Questions about sink and tap installation in Reigate

How much does sink and tap installation cost in Reigate?

For plumbing in a new sink and tap, budget around £230 to £460 including VAT in Reigate. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Reigate?

Yes. We work across Reigate, including the RH2 postcode district, and nearby towns such as Redhill and Horley. Book a free survey visit and we will arrange a time that suits you.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Sink and tap installation near Reigate

We also carry out sink and tap installation in these towns near Reigate: