Sink and tap installation in Portslade

Why sink and tap installation for a Portslade home?

A Portslade kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run.

Plenty of people in Portslade replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen. Kitchens in every part of Portslade are covered, and the survey visit is free wherever you are in East Sussex.

What does the job involve?

After the survey visit we write the scope down. For sink and tap installation in Portslade it usually covers:

New sink fitted, sealed and connected to the existing supplies and waste
Sink moved to a new position with new supply and waste runs
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Every joint leak tested, with water flow and drainage checked before handover
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Isolation valves on the hot and cold supplies, with flexible tap tails connected

Guide prices for sink and tap installation in Portslade

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for sink and tap installation in Portslade
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Portslade

You will find Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows throughout East Sussex. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering. Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning.

What rules apply to sink and tap installation in Portslade?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Planning ahead

Before buying a boiling water tap for your Portslade home, check its minimum water pressure and how much space it needs in the sink cupboard.
Find the stopcock in your Portslade home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Portslade

How much does sink and tap installation cost in Portslade?

Sink and tap installation in Portslade typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Portslade do you work in?

All of them. Our East Sussex coverage takes in the whole of Portslade, including the BN41 postcode district, as well as surrounding towns such as Hove. If you are unsure, send us your postcode.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Sink and tap installation in neighbouring towns

We also carry out sink and tap installation in these towns near Portslade: