Sink and tap installation in Brighton

Is sink and tap installation right for your Brighton kitchen?

A Brighton kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run.

Homeowners across East Sussex adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in. We cover all of Brighton, including the BN2 postcode district, and travel out to neighbouring towns across East Sussex.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Boiling water tap fitted with its tank, filter and power supply in the cupboard
Inset sink cut-outs made on site in laminate and wood worktops
Every joint leak tested, with water flow and drainage checked before handover
New sink fitted, sealed and connected to the existing supplies and waste
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed

Sink and tap installation prices in Brighton

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Sink and tap installation prices in Brighton
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

What kind of kitchens do we fit in Brighton?

Across East Sussex you will often find Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning. East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering.

What rules apply to sink and tap installation in Brighton?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Tips before you start

Before buying a boiling water tap for your Brighton home, check its minimum water pressure and how much space it needs in the sink cupboard.
Choose the sink before stone worktops are templated in your Brighton kitchen, so the fabricator can cut and polish the undermount opening to suit it.
Find the stopcock in your Brighton home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.

Questions about sink and tap installation in Brighton

How much does sink and tap installation cost in Brighton?

Guide prices in Brighton are about £230 to £460 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Brighton as well?

Yes. As well as Brighton itself, we cover the rest of East Sussex and nearby towns such as Hove and Portslade. The process is the same wherever the kitchen is.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Nearby places we cover

We also carry out sink and tap installation in these towns near Brighton: