Integrated appliance installation · East Sussex
Integrated appliance installation in Portslade
Whether your Portslade kitchen is a narrow galley or an open-plan room, integrated appliance installation follows the same careful order: survey, written scope, fit and a final check together.

Why do people in Portslade choose integrated appliance installation?
Landlords in East Sussex choosing integrated appliances for a rental kitchen want them fixed securely and plumbed with accessible valves, so a later replacement is straightforward.
Many people in Portslade buy integrated appliances separately from the kitchen and then need someone to fit them so the doors line up with everything around them. If your home is in Portslade or close by in Hove or Shoreham-by-Sea, the same survey, quote and fitting process applies.
What does the job involve?
Here is what usually goes into integrated appliance installation, adjusted to your Portslade kitchen after we have measured it:
- Accessible switching for built-in appliances, such as a switched fused spur, where needed
- Integrated fridges and freezers fixed into tall or under-counter housings
- Furniture doors attached with the fixed-hinge or sliding-hinge kit and aligned
- Built-in ovens and microwaves fixed into housings with the required ventilation space
- Appliance sizes checked against housings, door-fixing kits and ventilation gaps before fitting
- Dishwashers anchored under the worktop, levelled and connected to the supply and waste
Integrated appliance installation prices in Portslade
As a starting point for Portslade, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Integrated appliance fitted into its housing (each)Fridge, freezer, dishwasher or washing machine, door fitted | £50–£90 each |
| Dishwasher or washing machine plumbed inValve, waste connection and leak check | £90–£210 |
| Built-in oven fitted, like for likeOn an existing suitable circuit | £140–£290 |
| New cooker circuit from the consumer unitOften needed for a double oven or induction hob | £340–£800 |
Guide ranges cover labour on existing suitable supplies, apart from the new cooker circuit row; moved plumbing, new housings or units, door-fixing kits and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around Portslade
You will find Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows throughout East Sussex. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.
Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning. East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering.
What rules apply to integrated appliance installation in Portslade?
Fitting an integrated appliance needs no approval in England. Adding a socket or switched fused spur to an existing kitchen circuit is not notifiable under Part P, though it must meet BS 7671. A new circuit for a double oven or induction hob is notifiable, so it is certified through a competent person scheme or building control. Water connections should meet the water fittings regulations, with isolation valves and suitable backflow protection.
Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.
Before you book integrated appliance installation in Portslade
- If your Portslade home has a suspended timber floor, ask for the washing machine position to be checked for firmness before it is plumbed in.
- If you are replacing a single integrated appliance in your kitchen in East Sussex, note the old model number, as it helps find a replacement with matching dimensions.
- Ask for isolation valves and switches to stay reachable after fitting in your Portslade home, so an appliance can be turned off without removing it.
- Plan accessible switching for built-in appliances, such as a switched fused spur above the worktop, so they can be isolated without pulling them out.
Questions about integrated appliance installation in Portslade
How much does integrated appliance installation cost in Portslade?
For fitting an integrated appliance into its housing, budget around £50 to £90 each including VAT in Portslade. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Which parts of Portslade do you work in?
All of them. Our East Sussex coverage takes in the whole of Portslade, including the BN41 postcode district, as well as surrounding towns such as Hove. If you are unsure, send us your postcode.
Why does an integrated dishwasher need fixing under the worktop?
Because a dishwasher can tip forward when the loaded door and racks are pulled out, and it moves slightly as it runs. It is anchored with the brackets supplied, usually to the underside of the worktop or to the side panels, then levelled so its door lines up with the drawer fronts beside it. Stone worktops usually need the side fixings rather than screws from below.
Do integrated fridges need ventilation?
Yes. Fridges and freezers give off heat as they run, so the housing must leave the airflow route the manufacturer specifies, often a gap behind the appliance and a vent in the plinth or above the housing. Without it the appliance works harder, uses more energy and may struggle to keep food cold. We check the gaps against the installation instructions before fitting.
What is the difference between fixed-hinge and sliding-hinge integrated fridges?
On a fixed-hinge, or door-on-door, fridge the kitchen door is fixed straight onto the appliance door, so both swing together on the fridge's own hinges. On a sliding-hinge fridge the kitchen door hangs on cabinet hinges, and the appliance door is linked to it by runners that slide as it opens. Fixed-hinge models generally carry heavier doors more securely; sliding-hinge ones need the right housing and hinges.
Integrated appliance installation in neighbouring towns
The same service is available a short drive from Portslade, including:
- Integrated appliance installation in Hove
- Integrated appliance installation in Shoreham-by-Sea
- Integrated appliance installation in Brighton
- Integrated appliance installation in Lancing
- Integrated appliance installation in Worthing
- Integrated appliance installation in Rottingdean
- Integrated appliance installation across East Sussex
