Kitchen Installers UK

Sink and tap installation · Greater London

Sink and tap installation in Norbury

Sink and tap installation for Norbury homes: inset, undermount and ceramic sinks and kitchen taps fitted, including boiling water taps. Every job starts with a free survey visit and a written quote.

Guide price£200 to £1,300
Postcodes includeSW16
TimescaleHalf a day to 1 day
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

Why sink and tap installation for a Norbury home?

Plenty of people in Norbury replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.

A Norbury kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run. Norbury sits about 6 miles south of Westminster, and our Greater London coverage takes in everything in between.

What does sink and tap installation in Norbury include?

After the survey visit we write the scope down. For sink and tap installation in Norbury it usually covers:

  • New sink fitted, sealed and connected to the existing supplies and waste
  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • Every joint leak tested, with water flow and drainage checked before handover
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed

How much does sink and tap installation cost in Norbury?

As a starting point for Norbury, these ranges include VAT at 20% and allow for typical labour costs in London. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

How much does sink and tap installation cost in Norbury?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£260–£520
Boiling water tap installedTank under the sink, filter and power supply£200–£460
Sink moved to a new positionNew supplies and waste run£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Norbury

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Norbury

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

  • Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
  • Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
  • Find the stopcock in your Norbury home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
  • Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.

Questions about sink and tap installation in Norbury

How much does sink and tap installation cost in Norbury?

Guide prices in Norbury are about £260 to £520 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Norbury as well?

Yes. As well as Norbury itself, we cover the rest of Greater London and nearby towns such as Streatham and Tooting. The process is the same wherever the kitchen is.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Also covering nearby towns

Neighbouring towns where we offer sink and tap installation:

Planning more than one job in Norbury?

Free survey visit

Book a free survey visit in Norbury

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price