Kitchen Installers UK

Sink and tap installation · Tyne and Wear

Sink and tap installation in Newcastle upon Tyne

Looking for sink and tap installation in Newcastle upon Tyne? We survey, quote and carry out sink and tap installation for homes across Newcastle upon Tyne and the rest of Tyne and Wear, with one contract from the first measure to the final check.

Guide price£140 to £900
Postcodes includeNE1
TimescaleHalf a day to 1 day
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

When does sink and tap installation make sense in Newcastle upon Tyne?

A Newcastle upon Tyne kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run.

Plenty of people in Newcastle upon Tyne replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen. If your home is in Newcastle upon Tyne or close by in Gateshead or Gosforth, the same survey, quote and fitting process applies.

What does the job involve?

Your written quote lists everything included. For sink and tap installation, that normally means:

  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • New sink fitted, sealed and connected to the existing supplies and waste
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Every joint leak tested, with water flow and drainage checked before handover

What should you budget for sink and tap installation in Newcastle upon Tyne?

These guide ranges include VAT at 20% and are adjusted for prices in the North East. We confirm your price in writing after a free survey visit. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for sink and tap installation in Newcastle upon Tyne?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£180–£360
Boiling water tap installedTank under the sink, filter and power supply£140–£320
Sink moved to a new positionNew supplies and waste run£360–£900
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Newcastle upon Tyne homes

You will find tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses throughout Tyne and Wear. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

Building regulations, electrics and gas in Newcastle upon Tyne

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Getting the most from your sink and tap installation

  • Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
  • For a ceramic farmhouse-style sink in your Newcastle upon Tyne kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
  • Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
  • Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Newcastle upon Tyne

How much does sink and tap installation cost in Newcastle upon Tyne?

Guide prices in Newcastle upon Tyne are about £180 to £360 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Newcastle upon Tyne do you work in?

All of them. Our Tyne and Wear coverage takes in the whole of Newcastle upon Tyne, including the NE1 postcode district, as well as surrounding towns such as Gateshead. If you are unsure, send us your postcode.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Sink and tap installation in neighbouring towns

We also carry out sink and tap installation in these towns near Newcastle upon Tyne:

Planning more than one job in Newcastle upon Tyne?

Free survey visit

Book a free survey visit in Newcastle upon Tyne

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price