Kitchen Installers UK

Kitchen electrics · Tyne and Wear

Kitchen electrics in Newcastle upon Tyne

Kitchen electrics in Newcastle upon Tyne start with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Guide price£220 to £1,400
Postcodes includeNE1
Timescale1 to 3 days, split between first fix and second fix
An electrician fixing a double socket to a newly plastered kitchen wall above the base units, before the tiling goes on

Thinking about kitchen electrics in Newcastle upon Tyne?

Some Newcastle upon Tyne homeowners like their kitchen but run extension leads along the worktop; extra sockets on the existing circuit can solve that without a full refit.

If you are moving the hob to an island or swapping gas for induction in your Newcastle upon Tyne home, the kitchen needs a new supply routed to the new cooking position. Homes right across Newcastle upon Tyne are covered, as are nearby places such as Gateshead, Gosforth and the villages in between.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Newcastle upon Tyne covers:

  • Testing, the correct certificate, and notification of the work where it is required
  • Supplies for the cooker hood, under-cabinet lights and a boiling water tap
  • A check of the consumer unit, existing circuits and earthing before the layout is fixed
  • Accessible isolation switches for integrated appliances, reachable without pulling units out
  • First-fix cables and back boxes run before plastering or boarding
  • A dedicated circuit for an oven, range cooker or induction hob where needed

Kitchen electrics prices in Newcastle upon Tyne

As a starting point for Newcastle upon Tyne, these ranges include VAT at 20% and allow for typical labour costs in the North East. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Kitchen electrics prices in Newcastle upon Tyne
Typical projectGuide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout£220–£450
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting£450–£1,400
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified£270–£630

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Fitting kitchens in older and newer Newcastle upon Tyne homes

The housing mix across Tyne and Wear includes tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses, so no two kitchen fits are quite alike. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.

Regulations for kitchen work in Newcastle upon Tyne

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Planning ahead

  • Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
  • If you let a property in Tyne and Wear, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
  • If you live in a flat in Newcastle upon Tyne, find out where your consumer unit and meter are, as some sit in communal cupboards that need the managing agent's access.
  • Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.

Questions about kitchen electrics in Newcastle upon Tyne

How much do kitchen electrics cost in Newcastle upon Tyne?

For extra sockets or spurs on existing circuits, budget around £220 to £450 including VAT in Newcastle upon Tyne. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Can you measure up in Newcastle upon Tyne before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Newcastle upon Tyne. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What paperwork should I get for kitchen electrics?

You should get an Electrical Installation Certificate for any new circuit and a Minor Electrical Installation Works Certificate for additions to an existing circuit, such as extra sockets. In England and Wales, notifiable work is also registered with the council through a competent person scheme or building control, and a compliance certificate follows. Keep these papers safe, because buyers' solicitors and letting agents often ask for them.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Kitchen electrics near Newcastle upon Tyne

Neighbouring towns where we offer kitchen electrics:

Other kitchen work in Newcastle upon Tyne

Free survey visit

Book a free survey visit in Newcastle upon Tyne

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price