Kitchen Installers UK
0800 088 6341 Get a guide price

Sink and tap installation · England

Sink and tap installation in Merseyside

Our sink and tap installation work covers the whole of Merseyside, including Liverpool, Birkenhead and St Helens.

Guide price£140 to £950
Towns covered19 towns, including Liverpool
TimescaleHalf a day to 1 day
Get a guide price Book a free survey visit
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

When does sink and tap installation make sense in Merseyside?

If a new dishwasher or washing machine is going next to the sink in your Merseyside home, the trap and waste connections usually need changing as well.

People in Merseyside with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later.

What does sink and tap installation in Merseyside include?

Here is what usually goes into sink and tap installation, adjusted to your Merseyside kitchen after we have measured it:

  • New sink fitted, sealed and connected to the existing supplies and waste
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • Sink moved to a new position with new supply and waste runs
  • Every joint leak tested, with water flow and drainage checked before handover

How much does sink and tap installation cost in Merseyside?

Use these ranges to plan your budget. They include VAT, reflect costs in the North West, and are firmed up once we have seen your Merseyside kitchen. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

How much does sink and tap installation cost in Merseyside?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£190–£380
Boiling water tap installedTank under the sink, filter and power supply£140–£330
Sink moved to a new positionNew supplies and waste run£380–£950
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes across Merseyside

You will find Victorian terraces, Victorian and Edwardian villas, 1930s semis and converted warehouse flats throughout Merseyside. Two-up two-down terraces often have a small back kitchen off the living room, while 1930s semis tend to have a separate kitchen with space to open into a dining room.

Merseyside's mains water is soft, so limescale is rarely a big issue and taps, sinks and boiling water taps stay cleaner for longer. Terraced streets with back entries, city-centre flats with booked lifts and permit parking zones can all affect how and when a kitchen is delivered.

Knocking a small back kitchen through to the living room is a common way to make space for a table in a terrace. Large Victorian villas split into flats often mean fitting a full kitchen into one room, with shared services and stair access to plan around.

Rules for sink and tap installation in Merseyside

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas and listed buildings are common in older parts of Liverpool and the Wirral, so a new vent on a visible wall may need consent.

Before you start

  • Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
  • Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.
  • Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
  • Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
  • Choose the sink before stone worktops are templated in your Merseyside kitchen, so the fabricator can cut and polish the undermount opening to suit it.
  • Find the stopcock in your Merseyside home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.

Questions about sink and tap installation in Merseyside

How much does sink and tap installation cost in Merseyside?

For plumbing in a new sink and tap, budget around £190 to £380 including VAT in Merseyside. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of Merseyside?

Yes. We carry out sink and tap installation across Merseyside, including Liverpool, Birkenhead, St Helens and Southport. Every job starts with a free survey visit and an itemised written quote.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Sink and tap installation in towns across Merseyside

Choose a town for local guide prices and postcode coverage:

Sink and tap installation in nearby areas

Free survey visit

Book a free survey visit in Merseyside

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price