Sink and tap installation in Liverpool

Who usually needs sink and tap installation in Liverpool?

Homeowners across Merseyside adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.

If a new dishwasher or washing machine is going next to the sink in your Liverpool home, the trap and waste connections usually need changing as well. We cover all of Liverpool, including the L1, L2, L3, L4, L5 and L6 postcode districts, and travel out to neighbouring towns across Merseyside.

What does the job involve?

After the survey visit we write the scope down. For sink and tap installation in Liverpool it usually covers:

Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Sink moved to a new position with new supply and waste runs
New sink fitted, sealed and connected to the existing supplies and waste
Boiling water tap fitted with its tank, filter and power supply in the cupboard

Guide prices for sink and tap installation in Liverpool

Use these ranges to plan your budget. They include VAT, reflect costs in the North West, and are firmed up once we have seen your Liverpool kitchen. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for sink and tap installation in Liverpool
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£190–£380
Boiling water tap installedTank under the sink, filter and power supply	£140–£330
Sink moved to a new positionNew supplies and waste run	£380–£950
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Liverpool homes

Across Merseyside you will often find Victorian terraces, Victorian and Edwardian villas, 1930s semis and converted warehouse flats, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen off the living room, while 1930s semis tend to have a separate kitchen with space to open into a dining room.

Merseyside's mains water is soft, so limescale is rarely a big issue and taps, sinks and boiling water taps stay cleaner for longer. Terraced streets with back entries, city-centre flats with booked lifts and permit parking zones can all affect how and when a kitchen is delivered.

Do you need approval for sink and tap installation in Liverpool?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas and listed buildings are common in older parts of Liverpool and the Wirral, so a new vent on a visible wall may need consent.

Before you book sink and tap installation in Liverpool

For a ceramic farmhouse-style sink in your Liverpool kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Choose the sink before stone worktops are templated in your Liverpool kitchen, so the fabricator can cut and polish the undermount opening to suit it.
Before buying a boiling water tap for your Liverpool home, check its minimum water pressure and how much space it needs in the sink cupboard.
Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.

Questions about sink and tap installation in Liverpool

How much does sink and tap installation cost in Liverpool?

Sink and tap installation in Liverpool typically costs £190 to £380 including VAT for plumbing in a new sink and tap, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Liverpool as well?

Yes. As well as Liverpool itself, we cover the rest of Merseyside and nearby towns such as Kirkdale and Birkenhead. The process is the same wherever the kitchen is.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Also covering nearby towns

Close to Liverpool? We cover these nearby towns too: