Sink and tap installation in Prescot

What prompts sink and tap installation in Prescot?

People in Prescot with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later.

If you are fitting new stone worktops in your Prescot kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator. Prescot sits about 7 miles east of Liverpool, and our Merseyside coverage takes in everything in between.

What is included in the work?

After the survey visit we write the scope down. For sink and tap installation in Prescot it usually covers:

Boiling water tap fitted with its tank, filter and power supply in the cupboard
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Inset sink cut-outs made on site in laminate and wood worktops
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Every joint leak tested, with water flow and drainage checked before handover

What should you budget for sink and tap installation in Prescot?

The figures below are guide prices for Prescot, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for sink and tap installation in Prescot?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£190–£380
Boiling water tap installedTank under the sink, filter and power supply	£140–£330
Sink moved to a new positionNew supplies and waste run	£380–£950
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Prescot homes

You will find Victorian terraces, Victorian and Edwardian villas, 1930s semis and converted warehouse flats throughout Merseyside. Two-up two-down terraces often have a small back kitchen off the living room, while 1930s semis tend to have a separate kitchen with space to open into a dining room.

Merseyside's mains water is soft, so limescale is rarely a big issue and taps, sinks and boiling water taps stay cleaner for longer. Terraced streets with back entries, city-centre flats with booked lifts and permit parking zones can all affect how and when a kitchen is delivered.

Building regulations, electrics and gas in Prescot

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas and listed buildings are common in older parts of Liverpool and the Wirral, so a new vent on a visible wall may need consent.

Planning ahead

Before buying a boiling water tap for your Prescot home, check its minimum water pressure and how much space it needs in the sink cupboard.
Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Find the stopcock in your Prescot home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
An undermount sink in a stone worktop is cut and polished by the fabricator, so choose the sink before the worktops are templated.

Questions about sink and tap installation in Prescot

How much does sink and tap installation cost in Prescot?

Guide prices in Prescot are about £190 to £380 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Prescot do you work in?

All of them. Our Merseyside coverage takes in the whole of Prescot, including the L34 postcode district, as well as surrounding towns such as Huyton. If you are unsure, send us your postcode.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Sink and tap installation near Prescot

Close to Prescot? We cover these nearby towns too: