Kitchen Installers UK
0800 088 6341 Get a guide price

Sink and tap installation · England

Sink and tap installation in Greater Manchester

Homeowners and landlords across Greater Manchester can book us for sink and tap installation: inset, undermount and ceramic sinks and kitchen taps fitted, including boiling water taps.

Guide price£140 to £950
Towns covered42 towns, including Manchester
TimescaleHalf a day to 1 day
Get a guide price Book a free survey visit
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

Who usually needs sink and tap installation in Greater Manchester?

If you are fitting new stone worktops in your Greater Manchester kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator.

Plenty of people in Greater Manchester replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.

What does sink and tap installation in Greater Manchester include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • New sink fitted, sealed and connected to the existing supplies and waste
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • Sink moved to a new position with new supply and waste runs
  • Every joint leak tested, with water flow and drainage checked before handover

How much does sink and tap installation cost in Greater Manchester?

The figures below are guide prices for Greater Manchester, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

How much does sink and tap installation cost in Greater Manchester?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£190–£380
Boiling water tap installedTank under the sink, filter and power supply£140–£330
Sink moved to a new positionNew supplies and waste run£380–£950
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes across Greater Manchester

You will find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses throughout Greater Manchester. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

A common terrace project is opening the back kitchen into the middle room to make a kitchen-diner. Converted mill and warehouse flats often have open-plan kitchens against exposed brick or concrete, which affects how units, shelves and extraction are fixed.

Rules for sink and tap installation in Greater Manchester

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Before you start

  • Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
  • If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.
  • Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.
  • Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
  • Ask whether a boiling water tap for your kitchen in Greater Manchester needs a filter, how often it should be changed and where it will sit in the cupboard.
  • Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.

Questions about sink and tap installation in Greater Manchester

How much does sink and tap installation cost in Greater Manchester?

Guide prices in Greater Manchester are about £190 to £380 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of Greater Manchester?

Yes. We carry out sink and tap installation across Greater Manchester, including Manchester, Oldham, Wigan and Bolton. Every job starts with a free survey visit and an itemised written quote.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Sink and tap installation in towns across Greater Manchester

Choose a town for local guide prices and postcode coverage:

Sink and tap installation in nearby areas

Free survey visit

Book a free survey visit in Greater Manchester

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price