Sink and tap installation in Stockport

What prompts sink and tap installation in Stockport?

A Stockport kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run.

If a new dishwasher or washing machine is going next to the sink in your Stockport home, the trap and waste connections usually need changing as well. We cover all of Stockport, including the SK1 and SK3 postcode districts, and travel out to neighbouring towns across Greater Manchester.

What does sink and tap installation in Stockport include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Every joint leak tested, with water flow and drainage checked before handover
Inset sink cut-outs made on site in laminate and wood worktops
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Sink moved to a new position with new supply and waste runs

Sink and tap installation prices in Stockport

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

Sink and tap installation prices in Stockport
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£190–£380
Boiling water tap installedTank under the sink, filter and power supply	£140–£330
Sink moved to a new positionNew supplies and waste run	£380–£950
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Stockport

Typical homes in this part of Greater Manchester include Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

Regulations for kitchen work in Stockport

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Tips before you start

For a ceramic farmhouse-style sink in your Stockport kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
Find the stopcock in your Stockport home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.

Questions about sink and tap installation in Stockport

How much does sink and tap installation cost in Stockport?

Guide prices in Stockport are about £190 to £380 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Stockport do you work in?

All of them. Our Greater Manchester coverage takes in the whole of Stockport, including the SK1 and SK3 postcode districts, as well as surrounding towns such as Hazel Grove. If you are unsure, send us your postcode.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Sink and tap installation in neighbouring towns

The same service is available a short drive from Stockport, including: