Splashbacks and tiling in Gillingham

Why do people in Gillingham choose splashbacks and tiling?

When a Gillingham kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit.

If the units in your Gillingham kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own. If your home is in Gillingham or close by in Chatham or Rochester, the same survey, quote and fitting process applies.

What is included in the work?

Here is what usually goes into splashbacks and tiling, adjusted to your Gillingham kitchen after we have measured it:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Socket and switch plates refitted by an electrician once the tiling is finished
Old tiles removed and walls prepared, patched or boarded where needed
Tiled splashbacks between the worktop and wall units, set out from a centre line
Free survey visit to check the walls, agree the layout and give an itemised quote

Splashbacks and tiling prices in Gillingham

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Splashbacks and tiling prices in Gillingham
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£170–£460
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£340–£920
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£290–£690
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Gillingham homes

The housing mix across Kent includes Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, so no two kitchen fits are quite alike. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Gillingham

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Practical advice for Gillingham homeowners

Choosing stone worktops for a Gillingham kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Ask to see where the tiling will start before the first row goes on in your Gillingham kitchen, so narrow cut tiles end up in corners rather than on show.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Gillingham

How much do splashbacks and tiling cost in Gillingham?

Guide prices in Gillingham are about £170 to £460 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Gillingham?

Yes. We work across Gillingham, including the ME7 postcode district, and nearby towns such as Chatham and Rochester. Book a free survey visit and we will arrange a time that suits you.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Also covering nearby towns

Neighbouring towns where we offer splashbacks and tiling: