Sink and tap installation · England
Sink and tap installation in Dorset
Our sink and tap installation work covers the whole of Dorset, including Bournemouth, Poole and Weymouth.
Is sink and tap installation right for your Dorset kitchen?
People in Dorset with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later.
Some Dorset households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size.
What does sink and tap installation in Dorset include?
After the survey visit we write the scope down. For sink and tap installation in Dorset it usually covers:
- New sink fitted, sealed and connected to the existing supplies and waste
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Inset sink cut-outs made on site in laminate and wood worktops
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Sink moved to a new position with new supply and waste runs
- Every joint leak tested, with water flow and drainage checked before handover
How much does sink and tap installation cost in Dorset?
Typical sink and tap installation prices for homes in Dorset, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs in the South West sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £210–£410 |
| Boiling water tap installedTank under the sink, filter and power supply | £150–£360 |
| Sink moved to a new positionNew supplies and waste run | £410–£1,000 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes across Dorset
The housing mix across Dorset includes thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.
Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help. Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult.
Converted villa flats often mean fitting a full kitchen into a small room while keeping neighbours and shared services in mind. Many bungalow owners choose to open the kitchen into the dining room, so the layout and new lighting need planning together.
Rules for sink and tap installation in Dorset
Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.
Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.
Before you start
- Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.
- Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
- If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.
- An undermount sink in a stone worktop is cut and polished by the fabricator, so choose the sink before the worktops are templated.
- Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
- Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Questions about sink and tap installation in Dorset
How much does sink and tap installation cost in Dorset?
Sink and tap installation in Dorset typically costs £210 to £410 including VAT for plumbing in a new sink and tap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Dorset?
Yes. We carry out sink and tap installation across Dorset, including Bournemouth, Poole, Weymouth and Christchurch. Every job starts with a free survey visit and an itemised written quote.
What is the difference between an inset and an undermount sink?
An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Sink and tap installation in towns across Dorset
Choose a town for local guide prices and postcode coverage:
- Sink and tap installation in Bournemouth
- Sink and tap installation in Poole
- Sink and tap installation in Weymouth
- Sink and tap installation in Christchurch
- Sink and tap installation in Dorchester
- Sink and tap installation in Bridport
- Sink and tap installation in Blandford Forum
- Sink and tap installation in Swanage
- Sink and tap installation in Sherborne
- Sink and tap installation in Shaftesbury