Sink and tap installation · England
Sink and tap installation in Bristol
If you need sink and tap installation anywhere in Bristol, we survey the kitchen, agree the scope with you and book every trade through to handover.
Why do people in Bristol choose sink and tap installation?
Homeowners across Bristol adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.
If a new dishwasher or washing machine is going next to the sink in your Bristol home, the trap and waste connections usually need changing as well.
What does sink and tap installation in Bristol include?
After the survey visit we write the scope down. For sink and tap installation in Bristol it usually covers:
- New sink fitted, sealed and connected to the existing supplies and waste
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Inset sink cut-outs made on site in laminate and wood worktops
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Sink moved to a new position with new supply and waste runs
- Every joint leak tested, with water flow and drainage checked before handover
How much does sink and tap installation cost in Bristol?
As a starting point for Bristol, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £210–£410 |
| Boiling water tap installedTank under the sink, filter and power supply | £150–£360 |
| Sink moved to a new positionNew supplies and waste run | £410–£1,000 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes across Bristol
The housing mix across Bristol includes Victorian terraces, Georgian townhouses and flats, 1930s semis and flats in converted houses, so no two kitchen fits are quite alike. Bristol's Victorian terraces often have a narrow rear galley, while Georgian houses split into flats can have kitchens tucked into former bedrooms or reception rooms.
Bristol's mains water is hard, so limescale on taps, kettles and boiling water taps is common, and an inline filter or softener can help. Steep hillside streets, permit parking and terraces with no rear access are common in the city, so long worktops may need careful handling through the front door.
Many Bristol terraces have a small kitchen behind the back room, and opening the two into one space is a popular change. Where a flat sits in a converted Georgian or Victorian house, the work often means fitting a lot into a modest room while working around shared walls and services.
Rules for sink and tap installation in Bristol
Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.
Many of the city's older streets are conservation areas and some houses are listed, so a new extractor vent or the removal of historic features may need consent first.
Before you start
- Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
- Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
- An undermount sink in a stone worktop is cut and polished by the fabricator, so choose the sink before the worktops are templated.
- Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.
- Find the stopcock in your Bristol home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
- Before buying a boiling water tap for your Bristol home, check its minimum water pressure and how much space it needs in the sink cupboard.
Questions about sink and tap installation in Bristol
How much does sink and tap installation cost in Bristol?
Sink and tap installation in Bristol typically costs £210 to £410 including VAT for plumbing in a new sink and tap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Bristol?
Yes. We carry out sink and tap installation across Bristol. Every job starts with a free survey visit and an itemised written quote.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
What is the difference between an inset and an undermount sink?
An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.