Utility room fitting in Craigavon

Why utility room fitting for a Craigavon home?

Dog owners and keen walkers around Craigavon often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.

When a new kitchen is being planned in County Armagh, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself. Kitchens in every part of Craigavon are covered, and the survey visit is free wherever you are in County Armagh.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Craigavon covers:

Extract fan fitted to clear moisture from washing and drying
Utility sink and tap plumbed in, with new supplies and waste where none exist
Base, wall and tall units fitted, levelled and fixed to the wall
A vent to outside for a vented dryer, or a drain hose for condenser models
Free survey visit to check water, waste, power and outside wall positions
Stacking kit fitted where the washer and dryer sit one above the other

Guide prices for utility room fitting in Craigavon

These guide ranges include VAT at 20% and are adjusted for prices in Northern Ireland. We confirm your price in writing after a free survey visit. Labour rates in Northern Ireland are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for utility room fitting in Craigavon
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,600
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,600–£6,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£350–£880

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Craigavon homes

You will find Georgian townhouses, red-brick terraces, new town houses and rural bungalows throughout County Armagh. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.

Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead. Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter.

Regulations for kitchen work in Craigavon

In Northern Ireland, fitting a utility room in an existing space needs no planning permission or building control application. There is no notification scheme for domestic electrical work, but sockets and any new circuit should be installed and tested to BS 7671 and certified. New drainage connections go to council building control, Technical Booklet K covers ventilation, and a Gas Safe registered engineer should spillage-test any open-flued boiler after an extract fan is fitted.

Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.

Planning ahead

In a Craigavon flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
If your County Armagh home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Craigavon

How much does utility room fitting cost in Craigavon?

Utility room fitting in Craigavon typically costs £1,100 to £2,600 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in Northern Ireland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Craigavon?

Yes. We work across Craigavon, including the BT62, BT63, BT64, BT65, BT66 and BT67 postcode districts, and nearby towns such as Portadown and Banbridge. Book a free survey visit and we will arrange a time that suits you.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Also covering nearby towns

The same service is available a short drive from Craigavon, including: