Kitchen worktop fitting in Armagh

Why kitchen worktop fitting for an Armagh home?

Many people in County Armagh choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template.

Households in Armagh who cook a lot often want a harder-wearing surface near the hob, such as quartz, sintered stone or compact laminate, that copes with daily use. Our County Armagh coverage reaches every part of Armagh (BT60 and BT61) and out towards Portadown.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Armagh covers:

Matching upstands fitted and the joint to the wall sealed
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Free survey visit to measure the runs and check the base units are level
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Quartz, granite or sintered stone templated once the base units are fixed and level
Old worktops removed and taken away, with the sink and hob disconnected safely

Kitchen worktop fitting prices in Armagh

Use these ranges to plan your budget. They include VAT, reflect costs in Northern Ireland, and are firmed up once we have seen your Armagh kitchen. Costs across Northern Ireland tend to sit under UK averages, which these ranges reflect.

Kitchen worktop fitting prices in Armagh
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£440–£1,100
Solid wood worktops, supplied and fittedOiled before and after fitting	£790–£1,600
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,300–£2,800
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,600–£3,100
Old worktops removed and taken awayMore for stone	£70–£220

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of County Armagh include Georgian townhouses, red-brick terraces, new town houses and rural bungalows. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.

Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead. Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter.

Regulations for kitchen work in Armagh

In Northern Ireland, new worktops need no planning permission or building control application. Gas hobs must be disconnected and reconnected by a Gas Safe registered engineer, and any electrical changes should be installed and tested to BS 7671 and certified, even though there is no notification scheme for domestic electrical work. In a listed building, check before altering original fitted features, as listed building consent may be needed.

Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.

Planning ahead

If your Armagh kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
If your County Armagh home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Have the sink, tap and hob on site for templating, so the fabricator can cut the stone to the exact items you have bought.

Questions about kitchen worktop fitting in Armagh

How much does kitchen worktop fitting cost in Armagh?

Guide prices in Armagh are about £440 to £1,100 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Armagh?

Yes. We work across Armagh, including the BT60 and BT61 postcode districts, and nearby towns such as Portadown and Dungannon. Book a free survey visit and we will arrange a time that suits you.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Kitchen worktop fitting in neighbouring towns

Close to Armagh? We cover these nearby towns too: