Kitchen electrics · England
Kitchen electrics in Hampshire
Our kitchen electrics work covers the whole of Hampshire, including Southampton, Portsmouth and Basingstoke.
Who usually needs kitchen electrics in Hampshire?
Landlords in Hampshire often update kitchen electrics between tenancies, so appliances have proper isolation and the kitchen is in good order before the next electrical inspection.
Open-plan kitchen-diners in Hampshire need power in places a closed kitchen never did, such as an island, a breakfast bar or a dining-side wall for a wine cooler.
What do kitchen electrics in Hampshire include?
Here is what usually goes into kitchen electrics, adjusted to your Hampshire kitchen after we have measured it:
- A check of the consumer unit, existing circuits and earthing before the layout is fixed
- Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
- First-fix cables and back boxes run before plastering or boarding
- A dedicated circuit for an oven, range cooker or induction hob where needed
- Accessible isolation switches for integrated appliances, reachable without pulling units out
- Supplies for the cooker hood, under-cabinet lights and a boiling water tap
- Second fix of sockets, switches and appliance connections once tiling is done
- Testing, the correct certificate, and notification of the work where it is required
How much do kitchen electrics cost in Hampshire?
These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Extra sockets or spurs on existing circuitsNew positions to suit the layout | £290–£580 |
| Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting | £580–£1,700 |
| New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified | £340–£800 |
Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.
Kitchens in homes across Hampshire
Across Hampshire you will often find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, and each shapes the kitchen differently. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.
Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.
Terraced houses often have a small back kitchen behind the dining room, and owners frequently knock through to make one family space. Village cottages bring thick walls, low beams and sometimes a range cooker, all of which shape the layout.
Rules for kitchen electrics in Hampshire
In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.
Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.
Before you start
- Keep sockets and switches sensibly clear of the sink and hob, away from splashing water and heat, and agree the positions on the plan.
- Confirm the hob and oven ratings before first fix, because an induction hob or double oven may need a larger dedicated circuit.
- Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.
- Check whether your consumer unit has spare ways and RCD protection; an older board may need upgrading before new circuits can be added.
- Expect the power to be off in parts of your Hampshire home for a few hours on first-fix and second-fix days, and charge laptops and phones beforehand.
- Walk round your Hampshire kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
Questions about kitchen electrics in Hampshire
How much do kitchen electrics cost in Hampshire?
Guide prices in Hampshire are about £290 to £580 including VAT for extra sockets or spurs on existing circuits. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Hampshire?
Yes. We carry out kitchen electrics across Hampshire, including Southampton, Portsmouth, Basingstoke and Gosport. Every job starts with a free survey visit and an itemised written quote.
Do I need an electrician to add sockets in a kitchen?
Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.
What is first fix and second fix in kitchen electrics?
First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.
Will I need a new consumer unit for a new kitchen?
Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.
Kitchen electrics in towns across Hampshire
Choose a town for local guide prices and postcode coverage:
- Kitchen electrics in Southampton
- Kitchen electrics in Portsmouth
- Kitchen electrics in Basingstoke
- Kitchen electrics in Gosport
- Kitchen electrics in Waterlooville
- Kitchen electrics in Farnborough
- Kitchen electrics in Eastleigh
- Kitchen electrics in Winchester
- Kitchen electrics in Havant
- Kitchen electrics in Andover
- Kitchen electrics in Fareham
- Kitchen electrics in Fleet
- Kitchen electrics in Totton
- Kitchen electrics in New Milton
- Kitchen electrics in Bordon
- Kitchen electrics in Hythe, Hampshire
- Kitchen electrics in Yateley
- Kitchen electrics in Alton
- Kitchen electrics in Emsworth
- Kitchen electrics in Southsea
- Kitchen electrics in Romsey
- Kitchen electrics in Petersfield
- Kitchen electrics in Lymington
- Kitchen electrics in Ringwood