Kitchen electrics in Havant

Why do people in Havant choose kitchen electrics?

If you are moving the hob to an island or swapping gas for induction in your Havant home, the kitchen needs a new supply routed to the new cooking position.

Landlords in Havant often update kitchen electrics between tenancies, so appliances have proper isolation and the kitchen is in good order before the next electrical inspection. Havant sits about 19 miles east of Southampton, and our Hampshire coverage takes in everything in between.

What is included in the work?

Here is what usually goes into kitchen electrics, adjusted to your Havant kitchen after we have measured it:

First-fix cables and back boxes run before plastering or boarding
Testing, the correct certificate, and notification of the work where it is required
Second fix of sockets, switches and appliance connections once tiling is done
A check of the consumer unit, existing circuits and earthing before the layout is fixed
A dedicated circuit for an oven, range cooker or induction hob where needed
Accessible isolation switches for integrated appliances, reachable without pulling units out

Guide prices for kitchen electrics in Havant

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for kitchen electrics in Havant
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£290–£580
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£580–£1,700
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£340–£800

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

What kind of kitchens do we fit in Havant?

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

What rules apply to kitchen electrics in Havant?

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book kitchen electrics in Havant

Ask for USB sockets or extra doubles near the breakfast bar at first fix; changing a faceplate later is easy, adding a new box is not.
If you let a property in Hampshire, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
Keep sockets and switches sensibly clear of the sink and hob, away from splashing water and heat, and agree the positions on the plan.

Questions about kitchen electrics in Havant

How much do kitchen electrics cost in Havant?

For extra sockets or spurs on existing circuits, budget around £290 to £580 including VAT in Havant. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Can you measure up in Havant before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Havant. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

Nearby places we cover

Neighbouring towns where we offer kitchen electrics: