Kitchen electrics in Fleet

Why do people in Fleet choose kitchen electrics?

Many kitchens in Fleet were wired when a kettle and a toaster were the only things on the worktop, so a refit is the natural time to put sockets where they are really used.

Landlords in Fleet often update kitchen electrics between tenancies, so appliances have proper isolation and the kitchen is in good order before the next electrical inspection. If your home is in Fleet or close by in Farnborough or Aldershot, the same survey, quote and fitting process applies.

What is included in the work?

Your written quote lists everything included. For kitchen electrics, that normally means:

Testing, the correct certificate, and notification of the work where it is required
A check of the consumer unit, existing circuits and earthing before the layout is fixed
Accessible isolation switches for integrated appliances, reachable without pulling units out
Supplies for the cooker hood, under-cabinet lights and a boiling water tap
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
A dedicated circuit for an oven, range cooker or induction hob where needed

Guide prices for kitchen electrics in Fleet

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for kitchen electrics in Fleet
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£290–£580
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£580–£1,700
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£340–£800

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

House types around Fleet and what they mean for a kitchen

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Regulations for kitchen work in Fleet

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Worth knowing before the fit

Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
If you let a property in Hampshire, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
Expect the power to be off in parts of your Fleet home for a few hours on first-fix and second-fix days, and charge laptops and phones beforehand.
Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.

Questions about kitchen electrics in Fleet

How much do kitchen electrics cost in Fleet?

Guide prices in Fleet are about £290 to £580 including VAT for extra sockets or spurs on existing circuits. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Fleet do you work in?

All of them. Our Hampshire coverage takes in the whole of Fleet, including the GU13, GU51 and GU52 postcode districts, as well as surrounding towns such as Farnborough. If you are unsure, send us your postcode.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Nearby places we cover

Neighbouring towns where we offer kitchen electrics: