Kitchen Installers UK

Kitchen underfloor heating · Hampshire

Kitchen underfloor heating in Fleet

Whether your Fleet kitchen is a narrow galley or an open-plan room, kitchen underfloor heating follows the same careful order: survey, written scope, fit and a final check together.

Guide price£290 to £4,600
Postcodes includeGU13, GU51 and GU52
Timescale1 to 2 days, then floor finishes once the screed or levelling has cured
An electric underfloor heating mat rolled out over insulation boards on a kitchen floor, ready to be tiled

Is kitchen underfloor heating right for your Fleet kitchen?

In a compact Fleet kitchen with no room for a radiator at all, a plinth heater tucked under a base unit can be the simplest answer.

People planning a heat pump in Hampshire sometimes add underfloor heating to the kitchen at the same time, while the old floor is already up and the room is empty. Kitchens in every part of Fleet are covered, and the survey visit is free wherever you are in Hampshire.

What is included in the work?

Your written quote lists everything included. For kitchen underfloor heating, that normally means:

  • Screed, overlay boards or levelling compound, left to cure before finishes
  • Insulation boards so the floor responds more quickly when the heating comes on
  • A heating layout drawn to the kitchen plan, clear of units and appliances
  • Plinth heaters fitted under base units where wall space for a radiator is short
  • Door thresholds and plinth heights checked against the new floor build-up
  • A new circuit or fused spur, plus a thermostat with a floor sensor

How much does kitchen underfloor heating cost in Fleet?

Typical kitchen underfloor heating prices for homes in Fleet, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

How much does kitchen underfloor heating cost in Fleet?
Typical projectGuide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat£690–£1,700
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards£1,700–£4,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short£290–£690

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Fleet?

In and around Fleet, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Fleet

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Worth knowing before the fit

  • Allow extra days in your Fleet kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
  • Ask for the finished floor height to be worked out before you order units for your Fleet kitchen, so plinths and appliances still fit.
  • If you have a heat pump or a newer boiler in Hampshire, ask whether it can supply a wet floor zone or whether electric is simpler.
  • Insulation boards under an electric system help the floor warm up more quickly, especially when it is laid over a cold concrete slab.

Questions about kitchen underfloor heating in Fleet

How much does kitchen underfloor heating cost in Fleet?

Kitchen underfloor heating in Fleet typically costs £690 to £1,700 including VAT for electric underfloor heating for a kitchen floor, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Fleet?

Yes. We work across Fleet, including the GU13, GU51 and GU52 postcode districts, and nearby towns such as Farnborough and Aldershot. Book a free survey visit and we will arrange a time that suits you.

How soon can a floor be tiled over underfloor heating?

It depends on what the heating is laid in. Thin levelling compounds over electric mats are generally ready far sooner than a traditional sand and cement screed over wet pipes, which needs much longer to dry. The product instructions set the curing time, and the heating should be brought up to temperature gradually, following the system's commissioning guidance, rather than used to dry the floor.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Also covering nearby towns

Neighbouring towns where we offer kitchen underfloor heating:

Other kitchen work in Fleet

Free survey visit

Book a free survey visit in Fleet

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price