Kitchen Installers UK

Kitchen electrics · Dundee and Angus

Kitchen electrics in Dundee

Whether your Dundee kitchen is a narrow galley or an open-plan room, kitchen electrics follow the same careful order: survey, written scope, fit and a final check together.

Guide price£240 to £1,400
Postcodes includeDD1
Timescale1 to 3 days, split between first fix and second fix
An electrician fixing a double socket to a newly plastered kitchen wall above the base units, before the tiling goes on

When do kitchen electrics make sense in Dundee?

Many kitchens in Dundee were wired when a kettle and a toaster were the only things on the worktop, so a refit is the natural time to put sockets where they are really used.

Landlords in Dundee often update kitchen electrics between tenancies, so appliances have proper isolation and the kitchen is in good order before the next electrical inspection. If your home is in Dundee or close by in St Andrews or Forfar, the same survey, quote and fitting process applies.

What is in a typical job?

Here is what usually goes into kitchen electrics, adjusted to your Dundee kitchen after we have measured it:

  • Testing, the correct certificate, and notification of the work where it is required
  • Second fix of sockets, switches and appliance connections once tiling is done
  • Supplies for the cooker hood, under-cabinet lights and a boiling water tap
  • Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
  • First-fix cables and back boxes run before plastering or boarding
  • Accessible isolation switches for integrated appliances, reachable without pulling units out

How much do kitchen electrics cost in Dundee?

Typical kitchen electrics prices for homes in Dundee, including VAT and adjusted for Scotland. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

How much do kitchen electrics cost in Dundee?
Typical projectGuide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout£240–£470
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting£470–£1,400
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified£280–£660

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

House types around Dundee and what they mean for a kitchen

Across Dundee and Angus you will often find sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages, and each shapes the kitchen differently. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.

Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale. Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths.

Do you need approval for kitchen electrics in Dundee?

In Scotland, electrical work in a house does not normally need a building warrant, but it must meet building standards 4.5 and 4.6 and be designed, installed and tested to BS 7671. The notification arrangements used in England and Wales do not apply here. Ask for an Electrical Installation Certificate for a new circuit, or a Minor Electrical Installation Works Certificate for additions to an existing one, and keep it with your property papers. Every home in Scotland must have an interlinked heat alarm in the kitchen, so it is kept or refitted, and tested, as part of the job.

Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.

Practical advice for Dundee homeowners

  • Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
  • Walk round your Dundee kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
  • Ask for USB sockets or extra doubles near the breakfast bar at first fix; changing a faceplate later is easy, adding a new box is not.
  • Check whether your consumer unit has spare ways and RCD protection; an older board may need upgrading before new circuits can be added.

Questions about kitchen electrics in Dundee

How much do kitchen electrics cost in Dundee?

For extra sockets or spurs on existing circuits, budget around £240 to £470 including VAT in Dundee. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.

Do you cover all of Dundee?

Yes. We work across Dundee, including the DD1 postcode district, and nearby towns such as St Andrews and Forfar. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Kitchen electrics in neighbouring towns

Neighbouring towns where we offer kitchen electrics:

Planning more than one job in Dundee?

Free survey visit

Book a free survey visit in Dundee

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price