Kitchen electrics · Scotland
Kitchen electrics in Dundee and Angus
Homeowners and landlords across Dundee and Angus can book us for kitchen electrics: sockets, appliance circuits and isolation switches planned around your layout, tested and certified.
Why do people in Dundee and Angus choose kitchen electrics?
Kitchens bought online often come with integrated appliances that need their own supplies and switches, so it pays to plan those for your Dundee and Angus kitchen before the units arrive.
When a Dundee and Angus kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling.
What do kitchen electrics in Dundee and Angus include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- A check of the consumer unit, existing circuits and earthing before the layout is fixed
- Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
- First-fix cables and back boxes run before plastering or boarding
- A dedicated circuit for an oven, range cooker or induction hob where needed
- Accessible isolation switches for integrated appliances, reachable without pulling units out
- Supplies for the cooker hood, under-cabinet lights and a boiling water tap
- Second fix of sockets, switches and appliance connections once tiling is done
- Testing, the correct certificate, and notification of the work where it is required
How much do kitchen electrics cost in Dundee and Angus?
The figures below are guide prices for Dundee and Angus, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Extra sockets or spurs on existing circuitsNew positions to suit the layout | £240–£470 |
| Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting | £470–£1,400 |
| New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified | £280–£660 |
Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.
Kitchens in homes across Dundee and Angus
You will find sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages throughout Dundee and Angus. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.
Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale. Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths.
Tenement flats often have a small kitchen that owners open into the living room, which needs a building warrant if a load-bearing wall is involved, and can need one even if it is not, where the change affects the escape route or fire separation. Victorian villa kitchens may sit in an old scullery area with high ceilings and original features.
Rules for kitchen electrics in Dundee and Angus
In Scotland, electrical work in a house does not normally need a building warrant, but it must meet building standards 4.5 and 4.6 and be designed, installed and tested to BS 7671. The notification arrangements used in England and Wales do not apply here. Ask for an Electrical Installation Certificate for a new circuit, or a Minor Electrical Installation Works Certificate for additions to an existing one, and keep it with your property papers. Every home in Scotland must have an interlinked heat alarm in the kitchen, so it is kept or refitted, and tested, as part of the job.
Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.
Before you start
- Ask for isolation switches for the dishwasher, fridge and washing machine to be reachable without moving an appliance or a unit.
- Keep sockets and switches sensibly clear of the sink and hob, away from splashing water and heat, and agree the positions on the plan.
- Check whether your consumer unit has spare ways and RCD protection; an older board may need upgrading before new circuits can be added.
- Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.
- Walk round your Dundee and Angus kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
- Find your consumer unit and take a photo of it before the survey of your Dundee and Angus home, so the electrician can see straight away whether it has spare ways.
Questions about kitchen electrics in Dundee and Angus
How much do kitchen electrics cost in Dundee and Angus?
For extra sockets or spurs on existing circuits, budget around £240 to £470 including VAT in Dundee and Angus. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Dundee and Angus?
Yes. We carry out kitchen electrics across Dundee and Angus, including Dundee, Arbroath, Forfar and Montrose. Every job starts with a free survey visit and an itemised written quote.
Do I need an electrician to add sockets in a kitchen?
Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.
What is first fix and second fix in kitchen electrics?
First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.
Does an induction hob need its own circuit?
Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.
Kitchen electrics in towns across Dundee and Angus
Choose a town for local guide prices and postcode coverage:
- Kitchen electrics in Dundee
- Kitchen electrics in Arbroath
- Kitchen electrics in Forfar
- Kitchen electrics in Montrose
- Kitchen electrics in Brechin