Flat-pack kitchen fitting in Andover

When does flat-pack kitchen fitting make sense in Andover?

If you are fitting a utility room as well as a kitchen in Andover, flat-pack units for both rooms can be built and fitted as part of the same job.

Landlords in Hampshire sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged. If your home is in Andover or close by in Winchester or Newbury, the same survey, quote and fitting process applies.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Carcasses assembled on site on a flat surface and checked for square
Wall units hung on hanging rails or brackets fixed securely into the wall
Base units levelled on adjustable legs and fixed to the wall and to each other
Free survey visit to check the plan, the boxes and the room
Panels, plinths, sink, tap and appliance connections to existing points
Back panels fitted fully into their grooves or fixed as the instructions require

What should you budget for flat-pack kitchen fitting in Andover?

As a starting point for Andover, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for flat-pack kitchen fitting in Andover?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Andover homes

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

What rules apply to flat-pack kitchen fitting in Andover?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book flat-pack kitchen fitting in Andover

Set aside a room next to the kitchen in your Andover home for assembly, with enough floor space to lay a tall larder carcass down flat.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Andover

How much does flat-pack kitchen fitting cost in Andover?

Guide prices in Andover are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Andover do you work in?

All of them. Our Hampshire coverage takes in the whole of Andover, including the SP10 postcode district, as well as surrounding towns such as Winchester. If you are unsure, send us your postcode.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Flat-pack kitchen fitting near Andover

The same service is available a short drive from Andover, including: