Hob and oven installation · Shropshire
Hob and oven installation in Ludlow
Hob and oven installation for Ludlow homes: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely. Every job starts with a free survey visit and a written quote.
Why hob and oven installation for a Ludlow home?
Families in Ludlow adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.
Keen cooks across Shropshire often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. We cover all of Ludlow, including the SY8 postcode district, and travel out to neighbouring towns across Shropshire.
What is included in the work?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Old hob or oven disconnected safely and taken away for recycling
- Built-in single and double ovens fixed into housings with their ventilation gaps
How much does hob and oven installation cost in Ludlow?
Typical hob and oven installation prices for homes in Ludlow, including VAT and adjusted for the West Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the West Midlands are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£300 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£250 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£400 |
| New gas pipe run to a new hob positionPipework, testing and making good | £250–£800 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
House types around Ludlow and what they mean for a kitchen
The housing mix across Shropshire includes timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses, so no two kitchen fits are quite alike. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.
Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.
Building regulations, electrics and gas in Ludlow
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.
Before you book hob and oven installation in Ludlow
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- If your Ludlow home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
Questions about hob and oven installation in Ludlow
How much does hob and oven installation cost in Ludlow?
Guide prices in Ludlow are about £120 to £300 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Can you measure up in Ludlow before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Ludlow. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Also covering nearby towns
Neighbouring towns where we offer hob and oven installation:
- Hob and oven installation in Leominster
- Hob and oven installation in Bridgnorth
- Hob and oven installation in Stourport-on-Severn
- Hob and oven installation in Kidderminster
- Hob and oven installation in Hereford
- Hob and oven installation in Shrewsbury
- Hob and oven installation across Shropshire