Hob and oven installation · Cornwall
Hob and oven installation in Launceston
Need hob and oven installation in Launceston? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.

Is hob and oven installation right for your Launceston kitchen?
Many households in Launceston switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.
If the oven in your Launceston kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. Kitchens in every part of Launceston are covered, and the survey visit is free wherever you are in Cornwall.
What does hob and oven installation in Launceston include?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Gas supply moved to a new hob position, with pipework tested and made good
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Guide prices for hob and oven installation in Launceston
The figures below are guide prices for Launceston, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Costs in the South West sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
What kind of kitchens do we fit in Launceston?
The housing mix across Cornwall includes granite and slate cottages, Victorian terraces, post-war bungalows and converted barns, so no two kitchen fits are quite alike. Older stone cottages often have a small, low-ceilinged kitchen with uneven walls, while post-war bungalows tend to have a square kitchen beside a separate dining area.
Mains water across most of Cornwall is soft, which is kinder to taps and appliances, so heavy limescale build-up is rarely a problem. Narrow lanes, steep harbour streets and cottages with no parking outside can make delivering long worktops tricky, so delivery day needs planning in advance.
What rules apply to hob and oven installation in Launceston?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Where a cottage is listed or sits in one of the many harbour-town conservation areas, consent may be needed before a new extractor vent is cut through an outside wall.
Planning ahead
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Cornwall.
- If your Launceston home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- If you are replacing an old cooker with a separate hob and oven in your Launceston kitchen, ask for the gas supply position and condition to be checked first.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
Questions about hob and oven installation in Launceston
How much does hob and oven installation cost in Launceston?
Hob and oven installation in Launceston typically costs £120 to £310 including VAT for connecting a gas hob to an existing supply, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover all of Launceston?
Yes. We work across Launceston, including the PL15 postcode district, and nearby towns such as Tavistock and Liskeard. Book a free survey visit and we will arrange a time that suits you.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Nearby places we cover
We also carry out hob and oven installation in these towns near Launceston:
- Hob and oven installation in Tavistock
- Hob and oven installation in Liskeard
- Hob and oven installation in Saltash
- Hob and oven installation in Okehampton
- Hob and oven installation in Bodmin
- Hob and oven installation in Plymouth
- Hob and oven installation across Cornwall
