Hob and oven installation · Devon
Hob and oven installation in Okehampton
We take on hob and oven installation in Okehampton and the surrounding EX20 postcodes, working to a written scope so you know exactly what is included before anyone starts.

Who usually needs hob and oven installation in Okehampton?
Keen cooks across Devon often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.
Many households in Okehampton switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. Kitchens in every part of Okehampton are covered, and the survey visit is free wherever you are in Devon.
What does hob and oven installation in Okehampton include?
The exact scope is agreed after the survey, but a typical job in Okehampton covers:
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
What does hob and oven installation cost in Okehampton?
Typical hob and oven installation prices for homes in Okehampton, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around Okehampton
The housing mix across Devon includes cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows, so no two kitchen fits are quite alike. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.
Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.
Do you need approval for hob and oven installation in Okehampton?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.
Worth knowing before the fit
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Devon can be cut correctly by the fabricator.
- If you are replacing an old cooker with a separate hob and oven in your Okehampton kitchen, ask for the gas supply position and condition to be checked first.
- If you are moving the hob in your Okehampton kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
Questions about hob and oven installation in Okehampton
How much does hob and oven installation cost in Okehampton?
For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Okehampton. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.
Do you work near Okehampton as well?
Yes. As well as Okehampton itself, we cover the rest of Devon and nearby towns such as Tavistock and Launceston. The process is the same wherever the kitchen is.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Nearby places we cover
Close to Okehampton? We cover these nearby towns too:
- Hob and oven installation in Tavistock
- Hob and oven installation in Launceston
- Hob and oven installation in Exeter
- Hob and oven installation in Bideford
- Hob and oven installation in Newton Abbot
- Hob and oven installation in Barnstaple
- Hob and oven installation across Devon
