Kitchen Installers UK

Hob and oven installation · Devon

Hob and oven installation in Barnstaple

Whether your Barnstaple kitchen is a narrow galley or an open-plan room, hob and oven installation follows the same careful order: survey, written scope, fit and a final check together.

Guide price£120 to £820
Postcodes includeEX31
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

When does hob and oven installation make sense in Barnstaple?

Many households in Barnstaple switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

Families in Barnstaple adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. Homes right across Barnstaple are covered, as are nearby places such as Bideford, Ilfracombe and the villages in between.

What does hob and oven installation in Barnstaple include?

The exact scope is agreed after the survey, but a typical job in Barnstaple covers:

  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies

What should you budget for hob and oven installation in Barnstaple?

Typical hob and oven installation prices for homes in Barnstaple, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs in the South West sit close to the national guide.

What should you budget for hob and oven installation in Barnstaple?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£150–£410
New gas pipe run to a new hob positionPipework, testing and making good£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Barnstaple homes

Typical homes in this part of Devon include cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.

Do you need approval for hob and oven installation in Barnstaple?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Planning ahead

  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Devon.
  • If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Barnstaple

How much does hob and oven installation cost in Barnstaple?

Hob and oven installation in Barnstaple typically costs £120 to £310 including VAT for connecting a gas hob to an existing supply, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Barnstaple do you work in?

All of them. Our Devon coverage takes in the whole of Barnstaple, including the EX31 postcode district, as well as surrounding towns such as Bideford. If you are unsure, send us your postcode.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Nearby places we cover

We also carry out hob and oven installation in these towns near Barnstaple:

Planning more than one job in Barnstaple?

Free survey visit

Book a free survey visit in Barnstaple

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price