Hob and oven installation in Hanworth

When does hob and oven installation make sense in Hanworth?

Many households in Hanworth switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

If the oven in your Hanworth kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. We work throughout Hanworth (TW13) and across the wider Greater London area.

What is included in the work?

After the survey visit we write the scope down. For hob and oven installation in Hanworth it usually covers:

Built-in single and double ovens fixed into housings with their ventilation gaps
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Gas supply moved to a new hob position, with pipework tested and made good
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Old hob or oven disconnected safely and taken away for recycling

What does hob and oven installation cost in Hanworth?

Typical hob and oven installation prices for homes in Hanworth, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What does hob and oven installation cost in Hanworth?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Hanworth homes

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for hob and oven installation in Hanworth?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Hanworth homeowners

Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Greater London.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Hanworth

How much does hob and oven installation cost in Hanworth?

For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Hanworth. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Which parts of Hanworth do you work in?

All of them. Our Greater London coverage takes in the whole of Hanworth, including the TW13 postcode district, as well as surrounding towns such as Hampton. If you are unsure, send us your postcode.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Also covering nearby towns

Close to Hanworth? We cover these nearby towns too: