Hob and oven installation · Greater London
Hob and oven installation in Feltham
Hob and oven installation in Feltham starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

What prompts hob and oven installation in Feltham?
If the oven in your Feltham kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.
A new kitchen layout in Feltham sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. We cover all of Feltham, including the TW13 postcode district, and travel out to neighbouring towns across Greater London.
What is included in the work?
Here is what usually goes into hob and oven installation, adjusted to your Feltham kitchen after we have measured it:
- Old hob or oven disconnected safely and taken away for recycling
- Gas supply moved to a new hob position, with pipework tested and made good
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
Guide prices for hob and oven installation in Feltham
Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Feltham kitchen. Labour in London generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £160–£390 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £160–£320 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £200–£520 |
| New gas pipe run to a new hob positionPipework, testing and making good | £320–£1,000 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Local homes and their kitchens
The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.
What rules apply to hob and oven installation in Feltham?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Planning ahead
- If you are replacing an old cooker with a separate hob and oven in your Feltham kitchen, ask for the gas supply position and condition to be checked first.
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
- If your Feltham home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
Questions about hob and oven installation in Feltham
How much does hob and oven installation cost in Feltham?
For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Feltham. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.
Which parts of Feltham do you work in?
All of them. Our Greater London coverage takes in the whole of Feltham, including the TW13 postcode district, as well as surrounding towns such as Hanworth. If you are unsure, send us your postcode.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Also covering nearby towns
Close to Feltham? We cover these nearby towns too:
- Hob and oven installation in Hanworth
- Hob and oven installation in Ashford, Surrey
- Hob and oven installation in Hounslow
- Hob and oven installation in Sunbury-on-Thames
- Hob and oven installation in Hampton
- Hob and oven installation in Heston
- Hob and oven installation across Greater London
