Hob and oven installation · Greater London
Hob and oven installation in Hampton
We take on hob and oven installation in Hampton and the surrounding TW12 postcodes, working to a written scope so you know exactly what is included before anyone starts.

Why do people in Hampton choose hob and oven installation?
Landlords in Greater London replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.
A new kitchen layout in Hampton sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. Homes right across Hampton are covered, as are nearby places such as West Molesey, East Molesey and the villages in between.
What is in a typical job?
After the survey visit we write the scope down. For hob and oven installation in Hampton it usually covers:
- Old hob or oven disconnected safely and taken away for recycling
- Gas supply moved to a new hob position, with pipework tested and made good
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
What does hob and oven installation cost in Hampton?
These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £160–£390 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £160–£320 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £200–£520 |
| New gas pipe run to a new hob positionPipework, testing and making good | £320–£1,000 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Local homes and their kitchens
The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.
Regulations for kitchen work in Hampton
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Getting the most from your hob and oven installation
- If you are moving the hob in your Hampton kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- If your Hampton home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
Questions about hob and oven installation in Hampton
How much does hob and oven installation cost in Hampton?
For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Hampton. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.
Do you work near Hampton as well?
Yes. As well as Hampton itself, we cover the rest of Greater London and nearby towns such as West Molesey and East Molesey. The process is the same wherever the kitchen is.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Nearby places we cover
We also carry out hob and oven installation in these towns near Hampton:
- Hob and oven installation in West Molesey
- Hob and oven installation in East Molesey
- Hob and oven installation in Hanworth
- Hob and oven installation in Sunbury-on-Thames
- Hob and oven installation in Walton-on-Thames
- Hob and oven installation in Esher
- Hob and oven installation across Greater London
