Kitchen Installers UK
0800 088 6341 Get a guide price

Hob and oven installation · England

Hob and oven installation in Greater Manchester

If you need hob and oven installation anywhere in Greater Manchester, we survey the kitchen, agree the scope with you and book every trade through to handover.

Guide price£110 to £760
Towns covered42 towns, including Manchester
Timescale2 to 4 hours for most hobs and ovens
Get a guide price Book a free survey visit
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Why hob and oven installation for a Greater Manchester home?

A new kitchen layout in Greater Manchester sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Families in Greater Manchester adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.

What does hob and oven installation in Greater Manchester include?

Here is what usually goes into hob and oven installation, adjusted to your Greater Manchester kitchen after we have measured it:

  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Old hob or oven disconnected safely and taken away for recycling

How much does hob and oven installation cost in Greater Manchester?

Typical hob and oven installation prices for homes in Greater Manchester, including VAT and adjusted for the North West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs across the North West tend to sit under UK averages, which these ranges reflect.

How much does hob and oven installation cost in Greater Manchester?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£110–£240
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£140–£380
New gas pipe run to a new hob positionPipework, testing and making good£240–£760

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes across Greater Manchester

You will find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses throughout Greater Manchester. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

A common terrace project is opening the back kitchen into the middle room to make a kitchen-diner. Converted mill and warehouse flats often have open-plan kitchens against exposed brick or concrete, which affects how units, shelves and extraction are fixed.

Rules for hob and oven installation in Greater Manchester

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Before you start

  • A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
  • Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
  • Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater Manchester can be cut correctly by the fabricator.
  • Before buying an induction hob for your Greater Manchester home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.

Questions about hob and oven installation in Greater Manchester

How much does hob and oven installation cost in Greater Manchester?

For connecting a gas hob to an existing supply, budget around £110 to £280 including VAT in Greater Manchester. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of Greater Manchester?

Yes. We carry out hob and oven installation across Greater Manchester, including Manchester, Oldham, Wigan and Bolton. Every job starts with a free survey visit and an itemised written quote.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in towns across Greater Manchester

Choose a town for local guide prices and postcode coverage:

Hob and oven installation in nearby areas

Free survey visit

Book a free survey visit in Greater Manchester

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price