Hob and oven installation · Greater Manchester
Hob and oven installation in Walkden
We take on hob and oven installation in Walkden and the surrounding M28 postcodes, working to a written scope so you know exactly what is included before anyone starts.

Thinking about hob and oven installation in Walkden?
Landlords in Greater Manchester replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.
If your Walkden kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. Homes right across Walkden are covered, as are nearby places such as Farnworth, Swinton and the villages in between.
What does the job involve?
The exact scope is agreed after the survey, but a typical job in Walkden covers:
- Old hob or oven disconnected safely and taken away for recycling
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Hob and oven installation prices in Walkden
Use these ranges to plan your budget. They include VAT, reflect costs in the North West, and are firmed up once we have seen your Walkden kitchen. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £110–£280 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £110–£240 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £140–£380 |
| New gas pipe run to a new hob positionPipework, testing and making good | £240–£760 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
House types around Walkden and what they mean for a kitchen
The housing mix across Greater Manchester includes Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, so no two kitchen fits are quite alike. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.
Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.
What rules apply to hob and oven installation in Walkden?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.
Planning ahead
- If you are replacing an old cooker with a separate hob and oven in your Walkden kitchen, ask for the gas supply position and condition to be checked first.
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- If you are moving the hob in your Walkden kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
Questions about hob and oven installation in Walkden
How much does hob and oven installation cost in Walkden?
For connecting a gas hob to an existing supply, budget around £110 to £280 including VAT in Walkden. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.
Can you measure up in Walkden before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Walkden. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Also covering nearby towns
We also carry out hob and oven installation in these towns near Walkden:
- Hob and oven installation in Farnworth
- Hob and oven installation in Swinton
- Hob and oven installation in Tyldesley
- Hob and oven installation in Eccles
- Hob and oven installation in Atherton
- Hob and oven installation in Radcliffe
- Hob and oven installation across Greater Manchester
