Hob and oven installation in Oldham

Is hob and oven installation right for your Oldham kitchen?

A new kitchen layout in Oldham sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Many households in Oldham switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. Oldham sits about 6 miles north-east of Manchester, and our Greater Manchester coverage takes in everything in between.

What we cover for hob and oven installation in Oldham

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Built-in single and double ovens fixed into housings with their ventilation gaps
Appliance models checked against worktop cut-outs, oven housings and existing supplies

What should you budget for hob and oven installation in Oldham?

The figures below are guide prices for Oldham, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Costs across the North West tend to sit under UK averages, which these ranges reflect.

What should you budget for hob and oven installation in Oldham?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£110–£240
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£140–£380
New gas pipe run to a new hob positionPipework, testing and making good	£240–£760

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Oldham homes

Across Greater Manchester you will often find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.

Do you need approval for hob and oven installation in Oldham?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Worth knowing before the fit

Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater Manchester can be cut correctly by the fabricator.
If you are moving the hob in your Oldham kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Oldham

How much does hob and oven installation cost in Oldham?

Hob and oven installation in Oldham typically costs £110 to £280 including VAT for connecting a gas hob to an existing supply, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Oldham do you work in?

All of them. Our Greater Manchester coverage takes in the whole of Oldham, including the OL1 postcode district, as well as surrounding towns such as Chadderton. If you are unsure, send us your postcode.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation near Oldham

We also carry out hob and oven installation in these towns near Oldham: