Hob and oven installation in Manchester

Thinking about hob and oven installation in Manchester?

A new kitchen layout in Manchester sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Keen cooks across Greater Manchester often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. We cover all of Manchester, including the M1, M2, M3, M4, M9 and M11 postcode districts, and travel out to neighbouring towns across Greater Manchester.

What does the job involve?

Here is what usually goes into hob and oven installation, adjusted to your Manchester kitchen after we have measured it:

Built-in single and double ovens fixed into housings with their ventilation gaps
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Old hob or oven disconnected safely and taken away for recycling

Hob and oven installation prices in Manchester

The figures below are guide prices for Manchester, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

Hob and oven installation prices in Manchester
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£110–£240
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£140–£380
New gas pipe run to a new hob positionPipework, testing and making good	£240–£760

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Manchester homes

Typical homes in this part of Greater Manchester include Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

Building regulations, electrics and gas in Manchester

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Getting the most from your hob and oven installation

If you are replacing an old cooker with a separate hob and oven in your Manchester kitchen, ask for the gas supply position and condition to be checked first.
If your Manchester home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Greater Manchester.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Manchester

How much does hob and oven installation cost in Manchester?

Hob and oven installation in Manchester typically costs £110 to £280 including VAT for connecting a gas hob to an existing supply, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Manchester before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Manchester. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Nearby places we cover

We also carry out hob and oven installation in these towns near Manchester: